Recommended Settings and other useful stuff for RTD 1619BPD Players

Yes - on the Z2000 Pro, go to Settings/Other/About/Advanced Settings/Remotes & Accessories, select the remote and depair.

I don't think the remotes can be paired to two boxes at the same time, but if the two boxes aren't a long way from each other it can be a nuisance - bluetooth has a surprising range.

 

Thanks! Worked like a charm.

 

Hello, I am new to the UHD5000 player.
I have an old OPPO BDP-103D and a Panasonic TX-PR 65VT60 TV.
My old player works great on this TV, but I can't get my new UHD5000 player to work, it's either too dark or too pale. I've tried different settings, but I can't get the picture to match the old player.
What am I doing wrong
Here is my TV edid

 

Because the TV doesn't support HDR, I'd use VS10 as follows:

HDR Settings
============

UI Display Mode > SDR

HDR Output Mode > Advanced

SDR Content Output Mode > SDR

HDR10 Content Output Mode > SDR

HDR10+ Content Output Mode > SDR

HLG Content Output Mode > SDR

DV Content Output Mode > SDR

Dolby VS10 for SDR Content > No

Dolby VS10 for HDR10 Content > Yes

Dolby VS10 for HDR10+ Content > Yes

Dolby VS10 for HLG Content > Yes

Dolby VS10 for DV Content > Yes

I'd maybe experiment with Dolby VS10 for SDR Content > No to see if VS10 offers any improvement to SDR as well.

 

Where exactly do I get all these options?

I try to achieve the following scenario:
- UI always output in HDR10
- HDR10 output as untouched/unaltered HDR10
- HDR10+/DolbyVision also output as HDR10
- SDR output as SDR

So far I was using "Mapping to HDR10" albeit know it's not ideal for the SDR part of my scenario, only everything else being OK for use together with my madVR Envy. (i need untouched signal in any circumstance, but need to force HDR10 for GUI to avaoid HDMI handshakes for 99% 4K HDR content).

Any Idea about how I could get to the settings described above? I am especially missing the "UI Display Mode" Setting which would greatly help me.

 

thanks for the answer
but I don't have such settings in the menu
these are the ones I have

 

Oops - sorry guys! I didn't look at which forum we were in - these are the options in the new AML boxes...

For the BPD boxes, options are not as agile.

So @andy , in your case, I'd simply set HDR to "Dolby Vision VS10 Engine (Output SDR)" - that will have exactly the same effect as the AML settings above except that VS10 is used for SDR as well as everything else.

 

ok thanks
and what would you advise with color settings
right now I have it like this

 

4K 50~60 is fine (it's the only mode your TV will use at 4K 50~60)

I'd set 4K 23~30 to YUV 422 12Bit if available

And probably the same for Below 4K as well


At 23~30Hz, 4:2:2 is a unique mode where increase in bit depth doesn't impact bandwidth, so it works with HDMI1.4 because bandwidth is static at 8.9Gb/s and yet it still uses 12-bit.

 

thank you
I will try

 

hello
yesterday I decided to rewatch the film and it seems like there is not enough sharpness, the faces are kind of blurry.
on the old BDP-103D player there is no such thing, wrinkles are visible on the faces, but on the UHD5000 player there is no such clarity
maybe something with the settings
as I understand it, sharpness cannot be adjusted on the UHD5000?

 

No, there is no sharpness control.