Beta version v6.3.45 for Z9X release

Discussion in 'HDD Media player(RTD 1619DR)' started by mirror, Oct 27, 2021.

  1. Nicholas Hewitt

    Nicholas Hewitt Active Member

    try pressing the resolution button when it's on. Just keep pressing it.
     
  2. cucnz

    cucnz Well-Known Member

    /\
    as above
    sometimes ive had this because i knocked the ressolution button on the remote
    slowly hit it wait a few secs then try again repeat a few times till you get a resolution in your tv/reciever range, then you can set it back to normal range
     
    darkeyes909 likes this.
  3. Nicholas Hewitt

    Nicholas Hewitt Active Member

    I say hit the resolution button cause sometimes me and a few others have had a black screen and pressing the resolution button seems to be the only thing to bring it back to normal. Turns out an unsupported setting and a bug caused my zidoo to boot with a black screen. Also changing to many settings especially the 16-255 or whatever the setting is called. That caused me to get a black screen on boot.
     
  4. Ross0000

    Ross0000 New Member

    thanks guys, the resolution button hasn't worked. The front of the Zidoo shows 1080p. That never changes when I press the resolution button. Any other ideas. I looked at the unbrick instructions, but immediately get stuck since I don't know what a UART is.
     
  5. sojer2005

    sojer2005 Member

    I have a problem with the subtitles in mkv files. I don't remember this type of problem in previous versions.
    It looks like this:

    28F21FA7-894E-4F49-9F20-E6D23ECE0BBE.jpeg

    <Format> HEVC
    <Format_Profile> Main 10
    <Format_Level> 4
    <Format_Tier> Main
    <HDR_Format> SMPTE ST 2086
    <HDR_Format_Compatibility> HDR10
    <CodecID> V_MPEGH / ISO / HEVC
    <Duration> 2925.965000000
    <BitRate> 5740994
    <Width> 1920
    <Height> 1080
    <Sampled_Width> 1920
    <Sampled_Height> 1080
    <PixelAspectRatio> 1.000
    <DisplayAspectRatio> 1.778
    <FrameRate_Mode> CFR
    <FrameRate> 23.976
    <FrameCount> 70153
    <ColorSpace> YUV
    <ChromaSubsampling> 4: 2: 0
    <ChromaSubsampling_Position> Type 2
    <BitDepth> 10
    <Delay> 0.000
    <StreamSize> 2099743711
    <Default> Yes
    <Forced> No
    <colour_description_present> Yes
    <colour_description_present_Source> Stream
    <colour_range> Limited
    <colour_range_Source> Stream
    <colour_primaries> BT.2020
    <colour_primaries_Source> Stream
    <transfer_characteristics> PQ
    <transfer_characteristics_Source> Stream
    <matrix_coefficients> BT.2020 non-constant
    <matrix_coefficients_Source> Stream
    <MasteringDisplay_ColorPrimaries> Display P3
    <MasteringDisplay_ColorPrimaries_Source> Stream
    <MasteringDisplay_Luminance> min: 0.0001 cd / m2, max: 1000 cd / m2
    <MasteringDisplay_Luminance_Source> Stream
    <MaxCLL> 738 cd / m2
    <MaxCLL_Source> Stream
    <MaxFALL> 177 cd / m2
    <MaxFALL_Source> Stream
     
    Last edited: Oct 30, 2021
  6. Enet

    Enet Active Member

    There are no subtitles on the picture or in your Tree file description above. Also this looks like a 1080p remux of a 4k file. If that is the case then I've had issues with those kinds of files before but nothing to do with subtitles.
     
    Last edited: Oct 31, 2021
  7. darkeyes909

    darkeyes909 Active Member

    mine did the same thing when they came out with the first update. I gave up on it and left it plugged in but off for a few weeks and then when I went to take it out of service, it started up just fine. Who Knows?
     
  8. Ross0000

    Ross0000 New Member

    I got it back up. I followed the Emergency Flash Procedure, although it didn't display any information indicating any updating. But after I let it sit for 15 minutes on this process I restarted it and it came up.

    forum won't let me post the url...

    Thanks everyone for the help and ideas.
     
    SilverEye and darkeyes909 like this.
  9. kabum

    kabum New Member

    Added local clearlogo picture function (MovieName-clearlogo.png - must be png!)
    Where i can find this function???
    The screen of HT by change Posters and backgrounds is the same!
     
  10. Markswift2003

    Markswift2003 Well-Known Member SUPER Administrator Beta test group Contributor

    It's so you can add a local Clear Logo if you want to:

    Added local clearlogo picture function (MovieName-clearlogo.png - must be png!)
     
  11. kabum

    kabum New Member

    ok i save a logo named "1917"-clearlogo.png at the path in Media Center "storage/HomeTheater/Logos but the logo doesn´t show
     
  12. Enet

    Enet Active Member

    Is it a PNG file?
    Is it exactly the same name as your movie file?
     
  13. Markswift2003

    Markswift2003 Well-Known Member SUPER Administrator Beta test group Contributor

    It works exactly the same as local artwork - it goes in the movie folder
     
  14. Markswift2003

    Markswift2003 Well-Known Member SUPER Administrator Beta test group Contributor

    I've updated the File Suffixes and naming pdf with details of local art.

    Also posted to the Recommended Settings sticky.
     

    Attached Files:

  15. kabum

    kabum New Member

    ok problem...Check. my movies are not in folders.
     
  16. ThomasP

    ThomasP Active Member

    Release for the Z1000 Pro still not in sight?
     
  17. Markswift2003

    Markswift2003 Well-Known Member SUPER Administrator Beta test group Contributor

    It should still work.
     
  18. Markswift2003

    Markswift2003 Well-Known Member SUPER Administrator Beta test group Contributor

    There are a couple of issues with the Z9X firmware to iron out before the rest are released - Us Z9X users are the guinea pigs ;)
     
  19. sojer2005

    sojer2005 Member

    Sorry, nobody noticed the problem with the subtitles I wrote about earlier?
     
  20. pcristi

    pcristi Active Member

    I see too on embedded UTF-8 Plain Text, but now I can't reproduce, maybe relate to subtitle color setting.
     
    Last edited: Oct 31, 2021

Share This Page