v1.1.47 Beta version for Z9X 8K/Z30 PRO/Z3000 PRO/UHD8000

It is also Displayed on poster wall of Movie you select
Next to Audio & Subtitle scroll down select , Shut down …….

 

huh ?
im from new zealand ,all we speak is english

 

I can confirm that this FW has a delay. I’m running through a Trinnov Altitude 32.

There’s also a number of other issues (which were also present in .38), so I feel like we’re all beta testers here.

I have issues with scanning large folders, issues with scraping data, issues with the rewind/FF being basically useless for anything more than a few min, etc.

But I can compile things and circle back.

 

VC1 Files are all out of sync. I have to set a delay and it isn't enjoyable.

 

Hi to all. A "new" out of sync issue I found out with 1080p VC-1 + TrueHD. I watched "Body of Lies" and it started in sync (with the +75ms global delay I needed to set to get things in sync). After maybe 10 minutes it then went out of sync. Stopped and resumed and it was in sync again. Another more or less 10 minutes and out of sync again. I tried to pause and play again but it was still out of sync. So I tried to rewind a few seconds and it got perfectly in sync again. This happened during all the movie: it plays in sync and after some minutes it suddenly goes out of sync. The "solution" to get to the end is to stop and resume or to rewind a few seconds and play again.
It's obviously very annoying and needs to be fixed.

 

I just stated that VC1 has issues

 

So?? I was more specific because, in my case, with any VC-1 video they start in sync (with the +75ms delay I needed to set for any content)... it's only after some minutes that the out of sync suddenly occurs (at least with TrueHD tracks... didn't manage to test with other audio codecs). Giving as much informations possible, I think is the best way to help devs understand what may be going on

 

Mine starts off out of sync and stays that way, but mine is a TV show, Supernatural so the whole series is like this and the delay is longer than yours. I think it was +250 delay

 

Any sample file?

 

After a week of use, my new Z9X 8K (1.1.47) is working faster/smoother than Z9XPro and with no other important issue than "sudden freezes randomly" each 20 - 40 min of play via SMB-NAS. Need to stop, back to main window, workaround and come back for new playback until the next stop in different position. And sometimes you need to restart the box to get it fully responsible. Really annoying!!

 

A sample file wouldn't be useful in this case. You need the whole file and to watch the whole movie to get the issue. If I just send you a clip, the issue may not occur

 

This only happens with non-standard PTS, it would be best if the whole file could be provided

 

What does PTS mean? By the way, this is the media-info (I did the ripping in mkv from the BD):

Complete name : \\NAS\Blu-ray\Body of Lies 1080p [UNT] ENG TrueHD 5.1.mkv
Format : Matroska
Format version : Version 4
File size : 21.0 GiB
Duration : 2 h 8 min
Overall bit rate mode : Variable
Overall bit rate : 23.4 Mb/s
Frame rate : 23.976 FPS
Encoded date : 2016-11-27 16:30:09 UTC
Writing application : mkvmerge v9.5.0 ('Quiet Fire') 64bit
Writing library : libebml v1.3.4 + libmatroska v1.4.5

Video
ID : 1
Format : VC-1
Format profile : Advanced@L3
Codec ID : V_MS/VFW/FOURCC / WVC1
Codec ID/Hint : Microsoft
Duration : 2 h 8 min
Bit rate : 21.8 Mb/s
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 23.976 (24000/1001) FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.438
Stream size : 19.5 GiB (93%)
Default : Yes
Forced : No

Audio
ID : 2
Format : MLP FBA
Format/Info : Meridian Lossless Packing FBA
Commercial name : Dolby TrueHD
Codec ID : A_TRUEHD
Duration : 2 h 8 min
Bit rate mode : Variable
Bit rate : 1 531 kb/s
Maximum bit rate : 3 069 kb/s
Channel(s) : 6 channels
Channel layout : L R C LFE Ls Rs
Sampling rate : 48.0 kHz
Frame rate : 1 200.000 FPS (40 SPF)
Compression mode : Lossless
Stream size : 1.37 GiB (7%)
Language : English
Default : Yes
Forced : No

Text
ID : 3
Format : PGS
Muxing mode : zlib
Codec ID : S_HDMV/PGS
Codec ID/Info : Picture based subtitle format used on BDs/HD-DVDs
Duration : 2 h 7 min
Bit rate : 16.6 kb/s
Frame rate : 0.453 FPS
Count of elements : 3460
Stream size : 15.1 MiB (0%)
Language : English
Default : Yes
Forced : No

Menu
00:00:00.000 : en:Chapter 1
00:03:08.188 : en:Chapter 2
00:06:53.871 : en:Chapter 3
00:12:32.960 : en:Chapter 4
00:16:10.719 : en:Chapter 5
00:18:41.578 : en:Chapter 6
00:26:49.107 : en:Chapter 7
00:30:44.634 : en:Chapter 8
00:34:10.590 : en:Chapter 9
00:39:22.401 : en:Chapter 10
00:41:48.506 : en:Chapter 11
00:44:08.312 : en:Chapter 12
00:48:10.012 : en:Chapter 13
00:52:48.957 : en:Chapter 14
00:56:01.524 : en:Chapter 15
01:00:10.690 : en:Chapter 16
01:03:56.749 : en:Chapter 17
01:07:02.852 : en:Chapter 18
01:09:53.814 : en:Chapter 19
01:14:44.229 : en:Chapter 20
01:17:20.427 : en:Chapter 21
01:22:43.249 : en:Chapter 22
01:24:49.709 : en:Chapter 23
01:28:14.914 : en:Chapter 24
01:31:36.324 : en:Chapter 25
01:35:20.005 : en:Chapter 26
01:40:17.803 : en:Chapter 27
01:43:22.696 : en:Chapter 28
01:46:48.985 : en:Chapter 29
01:52:50.430 : en:Chapter 30
01:55:17.535 : en:Chapter 31
01:58:11.125 : en:Chapter 32
02:01:50.594 : en:Chapter 33

I don't see anything unusual (it always played perfectly with my previous Zidoos - Z9X, X9S, X8)

 

PTS is a time stamp in the video stream used to sync audio & video, if it's adrift in the file then sync falls over.

 

Yes, same here, hoping for a rewind, say, frame by frame (short press), or steps of xx seconds (long press)

 

I sent you a link to a file in the other thread regarding VC1 playback.

 

And the BUGS continue, this morning impossible to reach the website as usual! I had to restart zidoo 3 times in a row to finally have the site and my hard drives accessible....
So really unstable this zidoo

 

I can't get the player to recognise my TV is Dolby Vision capable when routed through my Denon AV Amp.

If I connect the player direct to the TV (Sony A95L), DV is detected and I can choose TV Led / LLDV

If I connect through the AV Amp it doesn't detect DV.

I have ensured I am using a high quality 8K HDMI cable to the TV, this cable works fine between the player and TV so known good.

The cable between the player and the AV amp is the one that came with the player, so I would hope this is a high-speed cable.

The Amp supports and passes through DV no issue, works fine with my 4k BluRay player.

I've checked all settings I can find, the default is pass-through so no configuration should be required as far as I can tell.

Anyone else using the Z9X 8K and a Denon AV Amp that has this working?

 

Yes, I'm using Z9X 8K > Denon AVC-X6700H > LG OLED83C34LA and playing DV contents without issues, in either player selection.

 

Yes I use a Denon AVR (see sig). No issues. What order do you turn on your stuff? Try TV, then AVR and Zidoo last.