Closed Boot problem after rom flash

Hi,
I just upgraded my working X10 to latest firmware found on zidoo website. after upgrade configuration crashed every time i tried to open more...wrtconfig

I then found link to reflash x10 with original rom and followed instruction... tried several times

Now box start up and show zidoo logo for a short time with HELLO in display before TV goes black.


Any suggestions... log file attatched

 

@freeroc

i have told you this issue with the full image fron your side ---> https://www.zidoo.tv/Support/guide/guide_target/R94kckcly39KKmVViAFMcQ==/guide_faq/CN6lY0XMyIg=.html

It can not be that no one is testing this image, please check inside the img file the system.bin or compile a image thats run.

This is not a good start for x10

Regards Lony

 

I've posted the same problem here:

http://forum.zidoo.tv/index.php?thr...rsion-for-zidoo-x10-released.4747/#post-23531

I hope they will fix it soon.

 

We are uploaded a new img firmware,please try again.sorry about that.
http://www.mediafire.com/file/qzl6669yum6hn2g/install-X10-v1.4.4-usb.zip
MD5 of zip file:ddf93e90071262fef0809b5434bc7ce8
MD5 of img file:3845274590fe666c9ff62dd3bba6060b

 

That worked, thanks for quick responce, but it seems like ZDMC is missing, can it be installed from other source

The size is must smaller then the original rom file to

Original 1 126 992 KB
Fixed 1 087 252 KB

 

http://ota-cloudfront.zidoo.tv/X9S/ZDMC/zdmc-16.4.13_siga.apk

 

After 12 Days it comes a fix, thanks for ASAP

 

Hello, when I want to flash with this Rom the zidoo say UP_ _ and nothing else.
Could help me
Thank you

 

You don't flash a update. You do it through android ota app. Using local update.

 

the img file you flash when you want or need a new rom, ota or normal updates is done from the update app.

 

I have make a mistaake, i have update the X10 with the FW of X9s
Now I must flash it because the ziddo say UP and nothing else
how I do
Tk
Thanks

 

Oeps! Do an emergency update using the http://www.mediafire.com/file/qzl6669yum6hn2g/install-X10-v1.4.4-usb.zip file.
Should recover from it.

 

Thank you but always the same
on the zidoo: UP_ _
I don't know ican do
Help

 

You are following the emergency ROM flash procedure holding the button at the back pressed during power on step by step?
https://www.zidoo.tv/Support/support_guide/guide_target/[ld]XQnOt03YTBKKmVViAFMcQ==.html

 

I make an another, now the ZIDOO say me : Boot but nothing arrive

 

Please indicate for each step what you do exactly and what the result is.

 

I try one more time and now the zidoo say : UP_ _
I think the zidoo is dead

 

You don't get any image on the TV? Keeping the button pressed long enough?
Correct update.img file on a FAT32 formatted USB stick in an USB2 port?
Try a different stick and a different port. Don't give up too fast.

Happened to me also with very similar players but could recover from it.
The fact that it says UP means that is detecting the boot-loader for an UPdate.