HDR10+

Discussion in 'HDD Media player(RTD 1619DR)' started by rozel, Oct 21, 2020.

  1. Xiro

    Xiro New Member

    [QUOTE = "rozel, publicación: 135884, miembro: 54830"] Gracias [USER = 59956] @Xiro [/ USER] su ayuda es muy apreciada.

    De acuerdo, lo he intentado nuevamente con mi control remoto de TV. Al reproducir un título HDR10 + conocido en el Zidoo, presiono "Fuente" en el control remoto de TV y luego presiono "información". A continuación, aparece la pantalla Input Signal Plus en la esquina superior derecha de la pantalla. Muestra "HDR UHD" y no "HDR10 + UHD" como esperaba. Supongo que HDfury AVR Key está jugando con el video por alguna razón; estoy hablando de esto con HDfury para ver qué dicen. No tengo idea de lo que está diciendo con respecto a la configuración de un atajo, ¿qué quiere decir exactamente? Explica los pasos. [/ QUOTE]



    un placer ayudarte. Cualquier dispositivo que esté conectado al televisor, si lo buscas verás que tiene opciones para editar nombre y tmb para "agregar a página de inicio". Si miras mi última foto verás que junto a Netflix, Amazon, etc. .. también está el zidoo y el escudo nividia. Esto es lo que quiero decir, una vez que esté viendo el ziddoo, vuelva a dar el enlace directo, obtendrá la información que desea ver
     
  2. cucnz

    cucnz Member

    since my amp ..sony dn 1080 cant pass HDR 10+ ,but is eArc compatible ,as is my Panasonic z1000 OLED, i just swapped cables around to test

    Im now getting HDR 10+ showing for The boys 4k tv epis in Season 1 ,as well as Atmos down to the amp,so happy chappy ...if it ever becomes a supported format :p

    Alita ,full 4k copy ,comes up with HDR10+ and Atmos flash on tv top left at start
    Jaws HDR remux mkv is also showing hdr10+ via tvs info
    Zidoo pause and info shows it only as HDR
    Panasonic info shows it as HDR 10+
    Amp shows as Atmos
    Shame DV wouldnt also play from full 4k Bluray copy

    seems like i should have been using earc from the start,once i upgraded to the pana z1000
     
    Last edited: Oct 24, 2020
  3. rozel

    rozel Member

    un placer ayudarte. Cualquier dispositivo que esté conectado al televisor, si lo buscas verás que tiene opciones para editar nombre y tmb para "agregar a página de inicio". Si miras mi última foto verás que junto a Netflix, Amazon, etc. .. también está el zidoo y el escudo nividia. Esto es lo que quiero decir, una vez que esté viendo el ziddoo, vuelva a dar el enlace directo, obtendrá la información que desea ver

    I'm currently only seeing HDR reported on the shortcut, so either my Samsung is only passing HDR10 or is passing HDR10+ but not reporting it.

    Anyone please?
     
  4. rozel

    rozel Member

    Well, I seem to have sorted things, it was a case of resetting the Zidoo and placing the sliders on the HDfury correctly, after which my HDR10+ titles played great and the "Info" button on the TV remote displayed correctly. Thanks again @Xiro for sticking with me, very much appreciated.
     
  5. Xiro

    Xiro New Member

    @rozel I'm glad everything works, now let's enjoy
     
  6. McBluna

    McBluna Active Member

    @rozel Do you see visual improvements with HDR+ vs HDR?
     
  7. rozel

    rozel Member

    Hi - it's early days but yes from the limited viewing so far of clips from my few HDR10+ titles they do seem really good indeed. Difficult to judge so far unless I can find a way of instantly turning off HDR10+ and view the title in HDR10, whilst the video is playing.

    I'll keep watching and report some more soon :)
     
  8. turbomaxBG

    turbomaxBG New Member

    My TV is Samsung Q70T and when whatch Alita zidoo z9x show HDR10+ tv show HDR
    zidoo is connected directly to tv
     

    Attached Files:

    Last edited: Nov 16, 2020
  9. Xiro

    Xiro New Member

    [QUOTE = "turbomaxBG, publicación: 137795, miembro: 62009"] Mi televisor es Samsung Q70T y cuando aparece Alita zidoo z9x muestra HDR10 + programa de televisión HDR
    zidoo está conectado directamente a la televisión [/ QUOTE]


    desde la actualización 6.0.60 y la última 6.066, mis archivos hdr10 +, juegan como hdr. Descubrí que quitando el cambio en Hz y resolución y estableciendo la resolución en 4k60hz, el hdr10 + funcionó nuevamente, pero por supuesto esta no es una solución válida, esperemos a que un nuevo firmware lo resuelva
     
  10. cucnz

    cucnz Member

    hi, havent had to change anything on my panasonic z1000 or Z9X with regards to hdr 10+ with either the 60 or.66 patches

    if its an hdr10 + movie or tv epi all i do is switch to HDR10 in the HDR settings in menu and it works perfectly
    Zidoo is still showing hdr10 + only as HDR in the info screen, but my TV is showing hdr10 +

    ie Alita
    I i leave hdr settings on auto it will play as dolby vision and if i swap to HDR in settings itll play as HDR10+
     
  11. Cezary

    Cezary Member

    Where can one find any HDR10+ demo?
     
  12. Cezary

    Cezary Member

    Thx @cucnz
     
  13. rozel

    rozel Member

    Sorry to go backwards but may I ask exactly what you mean by "all i do is switch to HDR10 in the HDR settings in menu" and "if I swap to HDR in settings it'll play as HDR10+?

    I know about leaving the Zidoo in HDR AUTO but after that, I'm confused
     
    Last edited: Nov 24, 2020
  14. Xiro

    Xiro New Member

    [QUOTE = "cucnz, post: 137800, member: 16580"] hola, no he tenido que cambiar nada en mi panasonic z1000 o Z9X con respecto a hdr 10+ con los parches 60 o 66

    si es una película hdr10 + o una epi de televisión, todo lo que hago es cambiar a HDR10 en la configuración de HDR en el menú y funciona perfectamente
    Zidoo todavía muestra hdr10 + solo como HDR en la pantalla de información, pero mi televisor muestra hdr10 +

    es decir, Alita
    Dejo la configuración de HDR en automático, se reproducirá como Dolby Vision y si cambio a HDR en la configuración, se reproducirá como HDR10 + [/ QUOTE]


    Hello, I did a factory reset in case the latest updates were not implemented well in my zidoo, but everything remains the same, I still do not have hdr10 + in 24hz
     
  15. cucnz

    cucnz Member

    atm to have The Boys s01 and s02 epis showing as HDR10+ 24hz

    Settings / Display / HDR / set Mapping HDR10 or Auto (thou tbh i thought it was only on hdr10 ..maybe that was pre f/w 66 )

    Atm both settings will play the HDR10+ epis for The boys as HDR10 + /24hz on my Panasonic Z1000 oled

    in the older Zidoo Firmware info screen it didnt show as hdr10+. while my Panasonic z1000 showed it correctly
    that seems to be sorted in f/w 66

    edit Important
    To get this working i had to run Z9X direct to tv and eArc back to reciever as my Sony DN1080 is DV passthru but not hdr 10+
     
  16. Markswift2003

    Markswift2003 Well-Known Member Beta test group Contributor

    @rozel

    I thought it best to bring this here - I thought you had this nailed with the LLDV/HDR10+ EDID?
     
  17. rozel

    rozel Member

    @Markswift2003 - I've not really got started with LLDV and as you know I'm having issues on and off playing HDR10+ titles. Until I get the HDR10+ issue sorted, I'm not moving on to LLDV. So I'm researching what could be wrong. You think the reason I get dark HDR10+ is down to my TV. I think not as this doesn't explain the fact that I sometimes have the issue and sometimes not. I'm currently thinking the issue is with the Vertex2
     
    Last edited: Nov 30, 2020 at 8:05 PM
  18. Markswift2003

    Markswift2003 Well-Known Member Beta test group Contributor

    [QUOTE "rozel, post: 138907, member: 54830"] [USER-21473] @ Markswift2003 [/ USER] - I've not really got started with LLDV and as you know I'm having issues on and off HDR playing10 + titles . Until I get the HDR10 issue sorted, I'm not moving on to LLDV. So I'm researching what could be wrong. You think the reason I get dark HDR10 + is down to my TV. I think not as this doesn't explain the fact that I sometimes have the issue and sometimes not. I'm currently thinking the issue is with the Vertex2 [/ QUOTE]

    The thing is that HDR10 + is exactly the same stream as HDR10, it's just the metadata that changes.

    So the first thing to do is remove the Vertex and see if the darkness issue persists.
     
  19. Markswift2003

    Markswift2003 Well-Known Member Beta test group Contributor

    Not sure what's up with this thread - quotes don't seem to work.... and typing goes bonkers!
     
  20. rozel

    rozel Member

    I can't do that as then I've no way to connect to TV except by not connecting my Receiver. Before I got the Vertex2 I had a HDfury AVR Key and experienced zero issues. Before that, I tried for a few days before my op, connected to TV only and again had zero issues. When I say it could be the Vertex2, I am including the various EDIDs given to me.
     

Share This Page