Problems etherne

No problems Wi Fi
Serious problems ethernet (dhcp, no dhcp)
Please check !!!!!!!
P.S. modem router "Asus dsl n55u"

 

nice message - zidoo support has no "crystal ball" to see what exact you mean

 

about "crystal balls", not the break ....

 

X6 hase dhcp, in the new firmware, it add the on/off button for ethernet.
which version do you use?
can you take a screen shot like this for me?

 

If I set static IP address, the "connect" button is not active, only "cancel" button is active. You can see this in the screen shot.
What should I do to set the ethernet with static IP?

 

@negher, why dont post your version?

 

negher, I have the same problem...

 

Even in my case the "connect" button is never active.
firmware v1.0.30

 

@skyhigh, version V1.0.27

 

Have you tried pushing "Enter" after last value?
One Zidoo operator suggested this...

 

I have the same problem. v 1.0.27
All settings down to DNS are OK
To set the DNS I
I set Ethernet IP Mode to (.) static OK
Scroll down to DNS 1 and enter my selected DNS
Scroll down to DNS 2 and enter in another selected DNS
Scroll down to CANCEL CONNECT ( notice that the text and the shadow effect on CONNECT is not as intense as CANCEL)
On CONNECT press OK and nothing happens. Even tried importing in 1 DNS or saving settings as a static to no avail. Tried also using a keyboard.
Is there some other place in the box to unlock the ENTER or CONNECT to have an automated DNS setting?

 

This is Rignt:

Like this ,I Think Maybe All of you are have a space key in front of the address when you insert

 

Wrong of this:
So all of you should check if you insert is correct

 

Funny!
A "Zidoo" solution may be change the input field to accept only numbers and dots.
Anyway a FAQ page with this and other solutions should be sufficient.

 

We'll trim it in next version

 

I just want to know if it's ok for you. Then we will optimize this so don't worry about

 

Good and fine!
But also accept only valid characters, numbers and dots, other (like o instead of 0 ) may create troubles.

 

Thank you "mirror", I finally solved the problem.

 

Thank you "honeCharles", I finally solved the problem.

 

thank you very much HoneCharles .....