Beta version v6.4(7).42 for Z9X/Z10 Pro/Z1000 Pro/UHD3000/NEO S/NEO X/NEO Alpha release

Slightly off topic here but I have this issue on my LG OLED 65E6. It’s only on Dolby Vision Netflix app or HDMI port. It happens in a lot of movies in continuous dark scenes. It slowly lowers OLED panel output until it’s hard to see. It’s not noticeable at first and very annoying. Bringing up TV menu or subtitles resets light output to max. I haven’t found any adjustment to fix that.

 

@3DBuff
Check it out if you haven't already:

How to: Turn off ASBL on LG OLED TV

 

go into the service menu, OLED settings and turn off TPC/GSR, on older OLEDs only TPC is present, if you have a phone with IR then download IR remote app, or get a service remote from Amazon.

 

I tried to flash the non G version firmware on current G version as I don't need to run Google anymore but it would not let me, I thought it was OK to jump between G and non G version on same firmware.

 

just install the non G version next update

 

yeah I was thinking of that.

 

I'm looking to upgrade my firmware and apps where needed. When I got my Z9X, I updated the Firmware to the latest, v6.35_G.
The HT Version is 4.0.96
The Zidoo Music app is v6.0

I have downloaded the current beta Firmware zip file to USB, Z9X_Pv6.4.42_G.... do I need to dowload and update any other apps or is that all taken care of by the Firmware update??

 

All the official apps from Zidoo will be updated with the last firmware, uncluding HT and Music Player.

 

By the way a bug I came across, is that the Frame rate switch pause (the setting that is supposed to pause the movie, during the hdmi handshakes), doesn't seem to work.
In other words it doesn't pause the movie.

I am in the last firmware of course

 

Works fine here - set it greater than your HDMI resync time and you'll see it working.

e.g if your resync takes about 5s you would normally set the delay to 5s but if you set it to 10s you'll see the pause.

 

To add to the list of movies that don't play in the right format when started from the Menu, the one below is an even odd one.

Played The Amityville Horror UHD from Vinegar Syndrome and while its only HDR10, the HDR didn't even kick in when played from the Menu, it simply played in SDR. Almost like whatever the highest grade the movie has, if an issue occurs, it will play one step lower. DV > HDR10 and HDR10 > SDR. Hope the new FW fixes all these.

 

Dear Friends

Once again Weather App isn't working. Any chance for fix?

Thank you in advance for your help.

Sincerely

 

Hello again everyone and thank you for the great products and support that you offer!

I want to ask if there is a bug in VS10 engine when playing DV files, it didn't do this before upgrading to the current version of the Z1000 Pro: v6.4.42 (or if there is something wrong in my settings maybe, that has been changed).

I am currently watching season 2 of See which is recorded in 23.976 fps (version: 2160p/DV/HEVC)
When I start playing an episode, the HDMI resyncs and the Output mode is: 3840x2160P @60Hz YUV420 10 Bits BT2020 VS10
I press back twice to stop the episode and play it again, until it Outputs: 3840x2160P @23Hz YUV444 10 Bits BT2020 VS10
Sometimes I have to stop and play the episode multiple times until I get the @23Hz YUV444, and sometimes it only wants to play it in @60Hz YUV420 regardless of how many times I try. Why does it not play as default in 23Hz?
I have attached pictures where you can see the correct Output mode in @23Hz YUV444, the Output in @60Hz and the MediaInfo of Episode 2.

Zidoo Z1000Pro Version: v6.4.42
My Settings:
Playback: Auto frame rate -> Frame rate mode -> Match frame rate or Match frame rate and resolution
Display:
Resolution: Auto (3840 x 2160P 60Hz) / Lock resolution: Disabled
Color settings:
4K 50~60Hz: Priority YUV422 10BIT
4K 23~30Hz: Priority YUV444 10BIT
Non-4K: Priority YUV444 10BIT
HDMI Color range: Auto
Deep Color Compatibility: OFF
HDMI Signal format: Enchanced
HDR: AUTO
Dolby Vision compatible mode: Priority LLDV (Player Led)
MaxCLL and MaxFALL: Enabled
HDCP: 2.2

 

I don't know if it's related to your issue but there is a couple of settings that you should change:

- 4K 50~60Hz: Priority YUV420 10BIT
- Non-4K: Priority YUV444 8BIT
- HDMI Color range: 16-235
- HDCP: Off

http://forum.zidoo.tv/index.php?thr...for-rtd1619-players-vs10-sdr-pdf-added.82695/

The issue could also come from a bad encode.

 

There is indeed a problem with AFR. For example, if you go to the TV settings while watching content, then when you re-sync, instead of 23.976, 60 appears. You have to restart the movie to make 23.976 appear.

 

I just tried turning the TV on, turning the Zidoo on, play the episodes and they start in 60Hz. Tried restarting the episodes a few times and it will not play in 23Hz. Sometimes it does, most of the time it doesn't. I tried Locking the resolution to 4K 23Hz and disabling AFR and it plays in 23Hz. I also tried going into the Tv settings while watching content and it does not affect the AFR with my original settings or with the locked resolution on 23hz.

Do you think it possible this issue is from a bad encode of all the episodes? I just tried a different tv series in DV that I have seen already, and it plays well in 23Hz YUV444 VS10 with the settings mentioned above. HDR10 and HDR10+ have no issues with the refresh rate
Does anyone else have this maybe they can test it? See.S02.2160p.ATVP.WEB-DL.DDP5.1.DV.HEVC-CasStudio

 

Actually this App works fine from time to time. Funny but true!!

 

Checking

 

Ok - I can replicate this.

It only seems to happen using VS10 HDR.

If I use VS10 DV or VS10 SDR then the framerate is ok.

And it only seems to happen with this file - I can't replicate with anything else. I think it's to do with the non-standard aspect ratio, but I'll send a debug log and sample file to the devs.

 

Hopfully the "fix" in the next firmware is removal of the Weather App and its extremely generic weather data. IMO, it is just not needed on a "local" media streaming player ... it can be best left on any of the actual internet streaming devices.... or on your own phone.