Recommended Settings and other useful stuff for RTD 1619DR Players

I tried the same file on my Nvidia Sheild Pro and everything works.
I have tested multiple files and the same results.

 

All I can tell you is that from that the file you sent the MediaInfo screen from has one audio track and it's 5.1 DTS-HD and not DTS-X.

DTS-X works fine here.

If you can snip a couple of minutes of the file and post to Mega and PM me the link I may be able to shed more light.

 

Ok, I also test this file and it's the same results.

Spoiler: DTS:X Test

General
ID : 0 (0x0)
Complete name : T:\DEMO\DTS X Speaker Check.m2ts
Format : BDAV
Format/Info : Blu-ray Video
File size : 136 MiB
Duration : 43 s 110 ms
Overall bit rate mode : Variable
Overall bit rate : 26.4 Mb/s
Maximum Overall bit rate : 48.0 Mb/s

Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.1
Format settings : CABAC / 4 Ref Frames
Format settings, CABAC : Yes
Format settings, Reference frames : 4 frames
Codec ID : 27
Duration : 42 s 417 ms
Bit rate mode : Variable
Maximum bit rate : 39.0 Mb/s
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 23.976 (24000/1001) FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive

Audio
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : DTS XLL X
Format/Info : Digital Theater Systems
Commercial name : DTS-HD Master Audio
Muxing mode : Stream extension
Codec ID : 134
Duration : 42 s 411 ms
Bit rate mode : Variable
Channel(s) : Object Based
Channel layout : Object Based

 

Can you point me in the direction of that file?

I just tried a DTS-X movie (Fast & Furious Tokyo Drift) and although the Zidoo reports as "DTS-HD 7.1 Channel 48khz" which is technically correct due to the transport codec, the receiver decodes correctly as DTS-X. And this file is XLL extension DTS-X.

 

hello and someone will answer me

 

Sorry my friend - missed your post.

I think no-one has answered because this is not a usual problem - maybe we need some more information.

 

but I thought I said everything, maybe the translator did not translate it correctly,
I mean that when making a pazy on a film, sometimes I can get a black screen and exit the film and I asked about the basic settings

 

Yeah I was only thinking about full bandwidth audio not EAC3.

 

I have tried this on 2 separate TV Vizio P75QX-H1 and Hisense 75U7G and they all have the same issue with the Zidoo Z9X, DTS_HD MA DTS:X pass-through as DTS.

https://www.demolandia.net/downloads.html?id=87980801

 

That triggers "DTS:X MSTR" on my Denon.

Let's see what the EDID says:

Goto Settings/Display/EDID and "Save EDID" for each display and upload the files - you'll have to change the extension from .bin to .txt to post it here.

 

That's not something I've ever seen - maybe it's the file?

Recommended settings are in the first post of this thread.

 

I also tried it on my cinema setup which is 7.4.1 which obviously matches the file perfectly - the Z9X in there is still on v6.3.22 and that plays perfectly in DTS:X too.

 

Attached is the edid.txt
Thanks for all your help!!

 

OK but the audio track is DTS-HD and not DTS:X. Media info would look something like this for the audio

Code:

Audio #1
ID                                       : 4352 (0x1100)
Menu ID                                  : 1 (0x1)
Format                                   : DTS XLL X
Format/Info                              : Digital Theater Systems
Commercial name                          : DTS-HD Master Audio
Muxing mode                              : Stream extension
Codec ID                                 : 134
Duration                                 : 2 min 6 s
Bit rate mode                            : Variable
Channel(s)                               : Object Based
Channel layout                           : Object Based

 

Channel(s) : Object Based
Channel layout : Object Based
Means DTS:X

 

Yes I know! You referring to media info from MY video! The one posted by YOU was DTS-HD MA and not DTS:X.

 

No probs.

So I was kind of expecting this EDID to not contain a DTS-HD audio block - it wouldn't explain why the Shield works but certainly would have explained the Zidoo.

However, according to the EDID it fully supports DTS-HD (including DTS-X) and if I load it into my Vertex, the Zidoo will spit out DTS-X perfectly.

The only think I can think of at the moment is that you have HD Audio Downmix switched on:

 

That was the first file he listed. We're talking about this one:

http://forum.zidoo.tv/index.php?thr...rs-includes-unbrick.82695/page-37#post-158669

 

Sorry my bad!

 

It's confusing as hell trying to unmuddle these threads sometimes!