EDID thread (RTD1619DR players)

Yes, only with 3D. I have an older projector I will try to hook up today and another adapter coming. I thought maybe there was a way to tell the projector to take 1920x2055 and switch on 3D or something like that.

 

I've no idea where the 1920x2055 comes into it - it's not a standard resolution or aspect ratio and doesn't even make sense for Half OU 3D.

 

I hooked it up to my old projector and it went right into 3D automatically so I'm guess this projector is just weird. Sucks that I'll be out 120 if that isn't the case with the new projector though.

 

Hi
I was able to get EDID reg for my OLED TV but unable to upload in zidoo z9x than Screen goes blank. I really try to fix picture quality on my zidoo. After some attempts i was able to make EDID but it only displays 1080P. There is no option in resolution for 2160P and only runs HDR videos and all DV videos display as HDR. I do not know how to make it right. Can anyone help?

Model name............... SONY TV *30
Windows description...... Generic PnP Monitor
Manufacturer............. Sony
Plug and Play ID......... SNYB905
Serial number............ n/a
Manufacture date......... 2021, ISO week 1
Filter driver............ None
-------------------------
EDID revision............ 1.3
Input signal type........ Digital
Color bit depth.......... Undefined
Display type............. RGB color
Screen size.............. 1440 x 810 mm (65.0 in)
Power management......... Not supported
Extension blocs.......... 1 (Unknown type)
-------------------------
DDC/CI................... n/a
Color characteristics
Default color space...... Non-sRGB
Display gamma............ 2.20
Red chromaticity......... Rx 0.625 - Ry 0.340
Green chromaticity....... Gx 0.280 - Gy 0.595
Blue chromaticity........ Bx 0.155 - By 0.070
White point (default).... Wx 0.283 - Wy 0.298
Additional descriptors... None
Timing characteristics
Horizontal scan range.... 14-136kHz
Vertical scan range...... 23-121Hz
Video bandwidth.......... 600MHz
CVT standard............. Not supported
GTF standard............. Not supported
Additional descriptors... None
Preferred timing......... Yes
Native/preferred timing.. 3840x2160p at 60Hz (16:9)
Modeline............... "3840x2160" 594.000 3840 4016 4104 4400 2160 2168 2178 2250 +hsync +vsync
Detailed timing #1....... 1920x1080p at 60Hz (16:9)
Modeline............... "1920x1080" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
Standard timings supported
640 x 480p at 60Hz - IBM VGA
800 x 600p at 60Hz - VESA
1024 x 768p at 60Hz - VESA
1280 x 1024p at 60Hz - VESA STD
1600 x 900p at 60Hz - VESA STD
1152 x 864p at 75Hz - VESA STD
1680 x 1050p at 60Hz - VESA STD
Report information
Date generated........... 15/05/2023
Software revision........ 2.91.0.1043
Data source.............. Registry - NB: improperly installed
Operating system......... 10.0.19045.2
Raw data
00,FF,FF,FF,FF,FF,FF,00,4D,D9,05,B9,01,01,01,01,01,1F,01,03,80,90,51,78,0A,0D,C9,A0,57,47,98,27,
12,48,4C,21,08,00,81,80,A9,C0,71,4F,B3,00,01,01,01,01,01,01,01,01,08,E8,00,30,F2,70,5A,80,B0,58,
8A,00,9F,29,53,00,00,1E,02,3A,80,18,71,38,2D,40,58,2C,45,00,9F,29,53,00,00,1E,00,00,00,FC,00,53,
4F,4E,59,20,54,56,20,20,2A,33,30,0A,00,00,00,FD,00,17,79,0E,88,3C,00,0A,20,20,20,20,20,20,01,6D

 

Hi Markswift2003
I have seen you helping many people .
I tried to Edit files from here and calibrated according to my tv MHZ and color but HDR white scenes are bit yellowish or sometimes greenish .
DV is totally blown out to soo much yellowish. And above 2 posts i have posted my tv details.
can you help me?
I wanna add on it. I use soundbar lg sn11rg as zidoo connects to soundbar and soundbar connect to tv

 

I'm not really sure what you are trying to do here, but let's start by sending me your original EDID:

To Download EDID
================

Settings/Display/Custom EDID/Save EDID

Save to a USB stick or network location.

Change the file extension from .bin to .txt to upload to the forum

(The forum won't accept .bin files)

 

Hi Markswift2003
Do i have to go in zidoo Settings/Display/Custom EDID/Save EDID ?

i have been using default Edid in zidoo or turned them off in both cases picture quality was not good over staurated and sharpness was bad. When i downloaded your Edid files hdr image became too dark but sharpness and framrate became better and dv was displayed very yellowish. When i edited your Edid hdr also display yellowish and greenish.
My tv support hdr 10 and dv its oled sony A84J.
Is that i can pull from zidoo ?Settings/Display/Custom EDID/Save EDID

 

EDID does not affect HDR image, sharpness or framerate.

DV colours can be affected by EDID because the colour primaries are defined in the Dolby Block. But these will be defined correctly in your own EDID if your TV supports Dolby Vision which I assume it does.

I don't think you need a custom EDID at all.

 

hi
When i used your files 1000 nit 4000 nit 600 mhz. Sharpness and smoothness became really good but the problem was color. In some EDIDs it became too dark which shows hdr10+ and some are too much yellowish in all cases it lose its native color. When i turn off custom Edid picture sharpness tearing and color too saturated.
i noticed when i played video in HDR in 1080p with 8 bit RGB color was natural how i want it to be. But in 4k it does not show like that. i ll upload my Edid in a bit.
i have never done it before. So thats a address ? Settings/Display/Custom EDID/Save EDID

 

Hi
Thanks for helping Markswift2003. Please find in attachment my default EDID . which i recently found out as you mentioned. I have played a little bit with my default EDID . I disabled BT2020ycc and enabled BT2020cYCC file and switched off max and minimum luminance thats solved my tearing sharpness problem.
and DV plays in really good quality. Now some scenes are too much washedout and loose their native color. Can you please help me out in this?

 

What happened to the 600MHz Rec.709 download? Don't see it on the first page but I do remember downloading it awhile back.

 

It's the one marked "SDR Rec.709"

 

Ah, Ok, thanks Mark!

 

Hi Markswift2003
I finally found out problem. My zidoo is showing wrong colour that is why there is much colour noise and picture is not stable nor smooth. My TV requires 10 bit RGB for true/natural colours somehow it only displays 4:4:4 or 4:2:2 when i select RGB. While RGB is only working in 1080p.
Is there any way to override 4:4:4 or 4:4:2 into RGB?

 

Hi
my tv output colors in RGB, I have checked in PS5 and UHD player but Zidoo force output in YUV 444 or 442 all HDR 10 files. Thats a reason I dont get accurate color which affects sharpness and not clear image. I have made plenty of EDID files but still same. unable to get HDR10 in RGB. Is there anyone can help?

 

I have a Zidoo Z10 Pro and I'm using beta version 6.4.42, but I don't see the LLDV YUV444, 12-bit option that I need. Can anyone help me?

 

As long as Settings/Display/Colour Settings/HDMI Signal Format is set to "Enhanced" you can select RGB in Colour Settings.

 

The display (and therefore the EDID) have to support it. If you don't see the options, the Dolby Block in the EDID does not support them and presumably neither does your display.

 

Hi, I'm new here and I admit I haven't read all the posts. Am I correct in understanding that for an Epson 9400 projector and a NEO S, it is worth using the SDR Rec 709 EDID? If so, is there anything to look out for or do I just add it and use it?