My setup currently consists of an iPad AIR M3 connected via USB to an RME ADI-2 DAC. Apple Music runs on the iPad, which outputs bit-perfect audio. When I use crossfading and the next song has a different sample rate, there is a dropout because the DAC has to adjust the sample rate. My question: Does the Luxsin X9 have the same effect when changing the sample rate? Thanks
Hello, thanks for the answer. That's great. Another important question: Are the digital inputs (USB, Optical, Coaxial) active in standby mode of the device (auto sense like BluOS devices)? Thanks.
Hello, that all sounds really great. I will take the risk and order the device. One more thing: I couldn't find any information in the manual about how to set the time for automatic standby. Is this even possible? Thanks.
Sorry thats not right. Just tested with iPhone 15 pro connected via USB-C. If you use the fading option in the Apple Music App and play one song after another which have different sample rates, then when the second song starts the sample rate of the first song will be shown in the displayof the X9 and after a few seconds the sample rate changes correctly with a short interruption of the song.
Maybe I mis-understand the "dropout". The short interruption is due to the DAC has to adjust the sample rate, but the X9 will continue music playing without stopping.
All DACs experience a brief cutoff in sound when switching sample rates during playback. Entirely normal and expected for bit-perfect playback as the device needs to reconfigure itself, including switching oscillators.
really, for me this isn't working: tested with USB and optical. Other points: (i) for the configurational button on the remote, you can only set switching for input and dac filter. My wish would be, that here we can also select the output or HP-EQ on/off. (ii) on the display is only in one option shown, if EQ is on or off. This should be shown in every bar or on the top. Also for me, I've to disable HP-EQ manually after I disconnected a can and the output switches to XLR. Is there a special setting, which I've not noticed? Sorry, but I'm owning the X9 only a few hours, but for me there are many options for a better GUI and handling through the remote and app.
really, for me this isn't working: tested with USB and optical. 【Luxsin】:When you want to wake up the X9 via USB, please make sure the input was set to USB before the X9 entered sleep mode. Other points: (i) for the configurational button on the remote, you can only set switching for input and dac filter. My wish would be, that here we can also select the output or HP-EQ on/off. 【Luxsin】:This is doable, we may add it in next firmware. (ii) on the display is only in one option shown, if EQ is on or off. This should be shown in every bar or on the top. 【Luxsin】: I’ll forward this feedback to our UI design team Also for me, I've to disable HP-EQ manually after I disconnected a can and the output switches to XLR. Is there a special setting, which I've not noticed? 【Luxsin】:The X9 automatically stores the settings for each output port. For example, if you turn off the HP-EQ function while using the XLR output, the X9 will remember this state. The next time you switch back to XLR from another output, you won’t need to manually disable HP-EQ again. Sorry, but I'm owning the X9 only a few hours, but for me there are many options for a better GUI and handling through the remote and app.
Sure, that I've done. But perhaps it means that there is a difference between standby coming from "auto standby" and (a deeper) standby settings after using the remote or the knob. Another point is the translation. Your master language is chinese and if I switch to german (where a lot of items are not translated) I see (but don't understand) many chinese... I think that the most user are understanding english and so it will be better to use englisch as master in i18n. Thanks for your fast response and I hope, that the x9 will become in the future also from the software side a fantastic item.
Update: In using the internal standby the wakeup is working as expected, but not with "power off" from the remote.
Question or remark about the Luxsin. Version 1.0.0.16 Sometimes after a reboot the unit is slow. The VU meter is not fast as normal and the menu or touchscreen reacts also slow. After a reboot this behavior is normally gone. Sometimes when the unit wakes up you can here the resistors clicking like 3 clicks per second and the start up screen is also slow. This slow behavior is also there when i try to connect the DMP-A6 by HDMI. I dont have any HDMI connected at this moment. Eversolo usb Luxsin works good. I dont now if this is from the Luxsin or the Eversolo. One more thing when i use the 4.4 for mine Fosi I5 headphone with the volume under -52.5, Stereo Width on 65. The right channel is missing about 7dB i can correct this by balance. After a check up by the doctor and all was good with mine ears i tried to find problem. With the adaptor and 4.4 plug on the XLR4 the problem is also there. This is all info i have for now. Looks like the style setting also gives this problem but then on other volume level. style headphone -53, style dance -48.5, style classical -63.5
Thanks for the feedback. Please send an email to support@luxsinaudio.com, We will send you instruction & attachment on how to troubleshoot the issue. -Luxsin
Hi, Does the HDM eARC entry when it receives a signal switch the X9 to that input ? (i.e. like a HDMI-CEC will turn on an A/V receiver). Thanks
Thank you. But, if the X9 is already switched to ARC, and on standby, it will wake up when it detects a signal ?
Can I program, say, the USB input to be fixed gain, this would be to use a DMP-A6 as a digital transport, and the other inputs to be variable gain ?
