New Firmware Update v1.5.60

1. Added Spotify Connect 24-bit lossless support.
2. Fixed occasional noise during Audirvana DLNA streaming playback.
3. Optimized playback for certain Qobuz tracks that occasionally failed to play.
4. Optimized the album screensaver functionality.
5. Optimized an issue where UPNP filenames occasionally displayed incorrectly.
6. Added file format display for UPNP tracks during playback.
7. Added metadata editing support for the music library.
8. Added UPNP server functionality to the music library.
9. Optimized the playback details interface layout.
10. Added translations for additional languages.
11. Fixed an issue where optical output caused audio dropouts on certain DACs.
12. Optimized recognition for specific SSD models that were occasionally not detected.
13. Fixed an issue where the track-skip function did not work after device reboot.
14. Fixed an occasional issue with the “Listen at Will” mode repeating tracks.
15. Fixed an occasional crash when scanning new devices in the music library.
16. Fixed an occasional crash on the Radio Paradise homepage.
17. Added support for Navidrome service.
18. Optimized LMS volume control
19. Optimized the issue of occasional automatic track skipping in the playlist.
20. Fixed an issue where SoundCloud occasionally failed to return search results
21. Fixed an occasional issue where pausing Spotify Connect would automatically skip to the next track.

Version: v1.5.46 to v1.5.60
Build Date - 2026-01-30

 

Do you need a job at Eversolo?

 

Hi , that could be quite possible perhaps he is seeking employment absolutely nothing to do with this situation at hand here, but I’m happy to hear that as most folks today don’t want to work good for him. He may have some better ideas than what has been put forth in the past who knows give him a shot , I have heard some news on an upgrade or update A few weeks back or so approximately, I am most certain there’s a number of folks that will perhaps welcome or embrace some of these changes or updates, Personally, speaking, just speaking for myself no one else most of them to just about all of them are totally useless to myself. Perhaps your mileage may vary. I don’t know,

However, I would be very satisfying with this said new update or upgrade if certain operational system changes were indeed put back in service as they were at one time for instance re-updating the overall gain level or output structure to where it once was when XLR/ RCA Was employed or engaged That absolutely would be very welcome, in rectifying the use of EQ all source outputs like it Once was, now only available on the A10 , again a great number of folks are unaware of these issues naturally as they are somewhat newcomers to these units and you can’t miss something or be aware of a particular issues that you never encountered ,and never experienced these changes in use in the past,

Please don’t fix something that isn’t broke !
I absolutely cannot elaborate or speak on any other Eversolo unit other than the A8 , A6 , Z8 as I retain absolutely no experience in operating or using one
However, I am most certain that some of these update, upgrade changes, etc. should prove quite or somewhat useful to certain particular folks or users, personally, speaking on the A8 this unit operate and performs the best in late 2024 into early 2025, As there are a few folks here also with Eversolo units that absolutely also believe this to be true and correct in their overall particular use of the above stated units, just a true and valid thought of opinion most certain everyone shares their own as it should be, unfortunately, on some of the above said statements of our as time goes forth a great deal of these problems or issues in discussion in overall original operation are being forgotten or lost as we proceed into the future, throughout the passing of time. Reinstating these Valuable and useful operational abilities would certainly be most Gratifying indeed extremely useful …

* boonikutzu, Thank you for your time to list complete contents ,in update,upgrade

please have a wonderful weekend everyone enjoy the music

 

Hi,
I’ve just updated.
I saw 8. Added UPNP server functionality to the music library.
Do I have to set anything in the Settings for managing Music Library from JPlay IOS, wich don’t discover any UPNP server on the A6 ?

 

Similar to Steph44200, I enabled the UPnP, my network sees the A6 but can't access any content on it.

 

Does it needs Factory reset ?

 

Nope, no need, for me work very well ! No bugs so far, using it for two days.

 

I'm still not on the new firmware
but
Is there anyting in the directory EverSoloMusic?
Or did you point your share folder towards an other directory?

(allowing acces to the complete device over upnp would be a security risk)

 

@svideo
No there is nothing in the EverSoloMusic folder, however, I did put one album in there yesterday to try it, but results are the same - no content.

 

Just upgraded to 1.5.60 using the device screen dialog buttons. Appeared to work fine, device rebooted twice. Device screen is fine, but iOS control app is very broken. Cast screen is covered with noise. Screenshot doesn't do it justice; it's refreshed with new trash every screen refresh.

A screen shot showing my mac laptop ( M3, Tahoe version 26.2 ) with the device in the distance (normal display on the device). This is running the eversolo app 1.2.70

And a screen capture of the eversolo ios app, version 1.2.70 on an iphone:


Also, the line of garbage on the screen (both laptop and iphone) is still there. Maybe related.
It indicates the programmers have a "off by one" error painting the screen with a line of trash.
It is especially visible with "dark" screen themes. This is a frame grab from a movie too large to attach. The garbage changes every refresh.

 

Tidal is still pushing it's songs into my "listen at will"

 

+1

 

I should add that it (of course) is working perfectly now. Both iphone and mac os.

In the past, some usage pattern -- maybe switching back & forth from full screen -- triggered the line of bad pixels at the bottom. (I found that switching this way "flushed the buffer" and eliminated built-up lag.)

But now, instead of just the line of noise at the bottom, it's trashing the screens as shown.

If I figure out how to reliably replicate it, I'll let you know.

 

Try deleting and reloading the Eversolo Control. That worked for me in the past.

 

I have no possibility to do online update. Is it possible to get the file somewhere? I still have 1.5.30 and do not know how to upgrade.

 

Hi,

EverSolo T8 v1.5.46 to v1.5.60 diff packages
https://www.mcbluna.net/wp/eversolo/eversolo-t8-v1-5-46-to-v1-5-60-diff-packages/

 

I just use the device screen or control app to update firmware. You can get the file here:
https://www.mcbluna.net/wp/eversolo/eversolo-model-overview/eversolo-dmp-a6-firmware-download/

Others will have to comment on how to use it, or maybe you can find that information in the user manual. I note this is not a ziddoo/eversolo site (?!) so at your own risk.

Edit: I see it's just an index page. Find the right update from 1.5.30 and there's an official eversolo download link.

 

Hi Belkine, what a shame , I have no knowledge in that area in particular , other than what I might seek if I were in that position, I believe the man stated he has NO availability to Internet access , or availability for this particular update or upgrade unfortunately, I am just assuming in which I do not like guessing why , this Absolutely makes your question somewhat difficult to give answer , however someone please correct me If I’m wrong I would imagine if this were myself with this somewhat unusual problem, I would try and find someone that could perhaps load the new update or upgrade onto a USB drive as that would give you the capability of enabling or installing this new update or upgrade into your unit if that is what you perhaps so desire, I have always found approximately in the last year and a half or so, to perhaps wait a few weeks until after the new update or upgrade has been issued or available for download, I absolutely understand your question. I just cannot put together your situation of such into some type of proper perspective at this particular time naturally, with no further knowledge or technical information, best of luck to you with this new update-venture. I believe a forum member above, has shown or listed the website where such information can be obtained from , Some what of a quite interesting Situation but absolutely possible !



please have a nice week. I hope everything works out. Enjoy the music,

 

So, what is new in v1.5.62 then?

 

Yes sir you are correct on that , v1.5.62 just looking or viewing at it again nothing changed, almost 99.9 % of These updates or upgrades are useless to myself, however I do know and totally understand that they may be very important to SOME users or folks , I will stay tuned were I’presently reside for the timeline as of now , v 1,5.46 , my current Version shown works and is performing excellent, With all due respect, everyone have a wonderful day and upcoming weekend, * ADD ON / if you page back on this particular topic I do believe they have been listed numerous times quite easy to Obtain in view of entire content of v1.5.62 , in which I believe stands in some correction in rectifying the context of previous version that had been also released in which was update or upgrade number, v 1.5.60. that had appeared to be to be somewhat problematic for some folks or users, the new and improved v 1.5.62 is now currently being issued for application of use , to the best of my knowledge and understanding,

please enjoy the music