Firmware Update for DAC-Z10: v1.0.1.45

Hello!
Downloaded, installed. Same issue with restart during the app use, but at least in my case, the sequence is: open the app, access the device, home page is ok, changing sources, output, volume, etc. When switch to setting there is nothing here. When finally the settings appears on page the DAC restart.
My only real complain is that the big POP noise in speakers on start is still here and very loud.

 

Hi,
i can't find the options to fix the volume and also the source renaming option, not on the device and not in the app, i may overlookign something.
ps. i was in the settings (on the device), Audio and Bluetooth (im not usiung it) but then the device restarted. May be some bug.

 

Again, z10 device crashed when listening music and app was open

 

Where to find it?

 

You can find in the device:

Settings---->DAC----->Volume settings:

 

Thx, found, in the corner..

 

I nearly upgraded to the new version. The passthrough function isn't a must-have for me; so I'll wait until the "restart" bug is fixed.
Hope the fix will come soon.

 

I updated to .40 and the display on the DAC confirms that. But the Eversolo iPhone app says I am at .35 on the about page?

 

you need reopen the app, it will change, i think because of the BT connection there is a refresh lag.

 

The pop noise and dac restart when going to settings in app can be solved?

 

I have done that several times without success so far.

 

Is there a tutorial on how to download the firmware when it becomes available ?

 

Just put the downloaded .pkg onto an USB stick, plug into the Z10, go on the device to version menu, on the Version number is like an arrow, from there you can update it, it will read the stick and update without displaying details, excepted a progress bar..

 

You do not want to unzip it!

 

Hello, please try this latest version, which has fixed this issue.

Model: DAC-Z10
Version: v1.0.1.42
Download URL: http://dl.eversolo.com/dac/ota/DAC-Z10/v1.0.1.42/EVERSOLOZ10.PKG
MD5 Checksum: 493EF48BCA3C700C9299498D49F62887
Changelog:
1. Fixed an issue where the device could unexpectedly reboot when connected to the Control App.

 

no reboots since update, tested 30min

 

Installed Version: v1.0.1.42. No reboots while using the app and no other issues so far. The app in general appears to be more responsive. Love the new updates.

 

Upgraded to v1.0.1.42 and no issues so far with changing any of the new options (or existing ones).

When are we likely to see things such as which inputs are enabled replicated in the app? Seems a bit odd that you can switch them off on the unit and they are still available in the app. Or am I missing something?

 

After upgrading to v1.0.1.42, I found the following issue:

1)
When pressing the up button on the remote control for home screen change, the Z10 sometimes reboot itself. It doesn't always happen but I experienced at least three times after the update in the last 3 hours.

2)
I use Roon. When the Z10 is rebooted in above cases, no music can be played from Roon. It seems that the connection between Z10 and T8 is lost. However, music playing from the internal SSD is fine.
To restore the Roon connection, I have to turn OFF and ON the power of both the T8 and Z10 again.

The same Roon connection lost happens when I just turn OFF and ON the Z10 manually. To restore the connection, I have to turn OFF and ON both the T8 and Z10 again.

I didn't experience this issue with the previous version v1.0.1.35, which comes with the DAC.

3)
With the new firmware, I hear improved music separation IMO.
However, the bass seems reduced than before.

Hi Kim @Zidoo Support-Kim
Is it possible to downgrade my Z10 to previous v1.0.1.35 ?

If so, where can I download the firmware ?

 

Hi guys, since I upgraded my z10 to 1.0.1.42 my dac reboots every 20-30 seconds so it is rendered totally unusable.
Is there a chance I can downgrade to .35 again? Is it bricked? Please help out! Thanks!