A6/A8 EQ frequencies fixed or configurable?

Hi, are the EQ band center frequencies user configurable, or are they fixed at 31.5/63/125/etc?

If fixed, how do you feel about that?

I am a current Blusound iNode user, and the Eversolo streamers seem to be a big leap ahead. But I’m feeding into an RME ADI DAC downstream, and you get spoiled by that EQ customization control….

 

You can change the centre frequency for all 10 frequencies in the parametric EQ section as well the Q for each one. Unfortunately, the basic Graphic EQ frequencies are fixed as are the Q settings.
To adjust the frequency of interest in the Parametric EQ section, tap on the wanted frequency (I used 2000Hz as an example), then adjust the frequency centre by tapping the (-) button to decrease or the (+) button to increase the centre frequency to the desired frequency in the control at the bottom of the screen (see yellow arrows). From there the Gain and the Q can be adjusted with the (-) and (+) buttons on the same bottom row. See the attached pic as an example. You can adjust each channel independently if desired.

 

Thanks, Alan.

Btw, nicely written reply.