ZIDOO Z9X

Discussion in 'HDD Media player(RTD 1619DR)' started by DELUCAS, Aug 4, 2020.

  1. Whitfield

    Whitfield Active Member

    Worked like a charm. It did leave the share in dark grey, but after a rescan it was gone.

    Thanks a bunch, Mark :)
     
    Markswift2003 likes this.
  2. Whitfield

    Whitfield Active Member

    Only to pop up again after accessing again :D

    I had a "quick & dirty" further look into it. It's more nuanced to say that the Z9X seems to show the most recently accessed SMB share (so not "Audio") of the NAS.
    Being harmless and probably a friendly-meant "recently-visited" reminder, I'll leave it as is.
     
  3. Markswift2003

    Markswift2003 Well-Known Member SUPER Administrator Beta test group Contributor

    Yep - that's how it works - as I said above "The SMB list shows either SMB clients or SMB shares that have previously been opened"
     
    Whitfield likes this.
  4. mytich

    mytich Member

    Hi all, I have been reading on these forums and AVSforum for quite some time now because I am looking to buy Zidoo Z9X in the near future and I am very excited about it. But I still have a question or 2:

    Is the watched status shown in HT4 for individual TV Show episodes and if it is, I would love for someone to show me a screenshot how it is shown that the episode has been watched.

    Also is there an IMDB rating shown for individual episodes? I read that was the feature but wasn't working ok sometimes...

    Thanks in advance :)
     
  5. Inikad

    Inikad Active Member

    For the second question, with IMDb option selected for the ratings, I can’t see any rating when I open the season of a TV show, only in the details page of the movies.
     
    Last edited: Sep 19, 2021
    mytich likes this.
  6. mytich

    mytich Member

    So you mean that you see ratings only for movies and not tv show episodes? Or that you need to select an episode to see the rating?
     
  7. Inikad

    Inikad Active Member

    The first option. Maybe I miss a setting somewhere but I don’t think so.
     
  8. mytich

    mytich Member

    I read sometime that something gets corrupted and that if you restart the device or something it does show the ratings again but i am not sure about this..

    Do you get only the imdb logo and no rating beside the logo where it should usually be? Or no logo either?
     
  9. Inikad

    Inikad Active Member

    By default, I was with TMDb ratings and no rating either for the episodes.

    While the IMDb ratings were downloaded to update the database, I could see the IMDb logo in the details page of the season. But once the update procedure finished, the logo was gone. It only displays the logo IMDb + rating in the details pages of the movies.
     
    mytich likes this.
  10. mytich

    mytich Member

    That's weird.. thank you for commenting.. I hope it gets fixed in the future again.

    What about the watched status for episodes? Does it show?
     
  11. Inikad

    Inikad Active Member

    [​IMG]
     
    mytich likes this.
  12. Inikad

    Inikad Active Member

    About the ratings for the episodes of a TV Show, I am asking to myself if the source used to scrape coud have any influence: I use TMDb for the TV show. Maybe with TVDb, that would be different and you could see the ratings for each episode.

    Other users could tell you.
     
    Last edited: Sep 19, 2021
    mytich likes this.
  13. mytich

    mytich Member

    Thank you for the screenshot man I appreciate it :) ... I am looking forward to buying the Z9X and playing with that myself. In the meantime if anyone that has working ratings for episodes may jump in.
     
  14. vsoft

    vsoft New Member

    09-16 13:15:53.479 2008 12689 W HDMIRXRequest_processor: findAvailableSlot no free slot
    09-16 13:15:53.497 2008 12689 W HDMIRXRequest_processor: findAvailableSlot no free slot
    09-16 13:15:53.513 2008 12689 W HDMIRXRequest_processor: findAvailableSlot no free slot

    why am i getting this frequently?.
     
  15. Idris78

    Idris78 New Member

    I don't see any reviews of series either. You still have the same problem?
     
  16. Inikad

    Inikad Active Member

    Yes, no rating for the episodes.
     
  17. DMD

    DMD Member

    Good evening
    I have never had a NAS, now I have decided to store all the media in NAS (QNAP TS-431K) connected to the home network.
    I ask if Z9X in the network search, it detects the NAS without problems.
    Thank you
     
    Last edited: Jan 26, 2022
  18. mjolken

    mjolken New Member

    I a bit lost when it comes to HDMI range for different content. I got an Sony kd-55 AG8.
    When playing Black Panther (HDR10), there is an dark fight scene 10min in to the movie. It's feels to bright/grey.

    If i set HDMI range to auto in Zidoo, it uses Limited(auto) on the TV which makes the scene very dark, way to dark.

    If set to limited (16-235) in Zidoo, and use Limited on the TV, it's way better, but then it's feels grey? (And how can this be different compared to the above i tried? It's both using Limited?)

    Then if i set Zidoo to 0-255(full), TV will aupt use full, but it's stupid grey and wrong.

    So what is the correct i should use?
    This is for HDR10.. but I wonder this for all different content. As I can play DV as well and so on.

    Thanks for the help
     
    mytich likes this.
  19. Katusik78

    Katusik78 New Member

    Всем привет!
    Имею проблему.
    Короче при включении в сеть, при включении в сеть с нажатым ESC, при включении в сеть при нажатом TAP в консоли рисует:

    С1:80000000
    C2h
    размер установки: 00000a78

    ------------------- Написать выравнивание --------------------
    DQS0 PI = 0x00000019, DQ0 PI = 0x00000001
    PI DQS1 = 0x0000001a, PI DQ1 = 0x00000002
    PI DQS2 = 0x00000017, PI DQ2 = 0x0000001f
    PI DQS3 = 0x00000019, PI DQ3 = 0x00000001

    -------------------- Сканирование TX VREF ---------------------
    ODT60, диапазон TX VREF = [0x00000c97, 0x00000c83]
    Tx VREF = 0x00000c8d, Вес = 0x0000000c

    ------------------- Калибровка DQS -------------------
    Карта DQS0 = [0x00000012, 0x0000001d], ширина = 0x0000000c
    DQS0 Лучший PI = 0x00000018
    Карта DQS1 = [0x00000013, 0x0000001e], ширина = 0x0000000c
    DQS1 Лучший PI = 0x00000019
    Карта DQS2 = [0x0000000f, 0x0000001b], ширина = 0x0000000d
    Лучший PI DQS2 = 0x00000015
    DQS3 Map = [0x00000012, 0x0000001d], Width = 0x0000000c
    DQS3 Best PI = 0x00000018
    BSTC verify: OK

    DDR calibration done

    REG32(VO_SW_SEC_1) = 0x00ce070d
    warmboot_indicator = 0x00208111
    C3
    DTE_Bootcode Flash Addr = 0x00012600
    DTE_Bootcode Flash Length = 0x00044a00
    DTE_Bootcode target addr = 0x10120000
    C4
    C5
    jump to FSBL_DDR: 0x10120000
    FSBL_DDR: Mar 17 2020, 10:29:37
    p_FW_Entry_DTE_FW_Certificate: type: 10, flash_addr: 0x20c00, length: 0x400, emm
    c_partition: 0
    p_FW_Entry_DTE_BOOTCODE_RTK: type: 16, flash_addr: 0x1a0000, length: 0x180000, e
    mmc_partition: 0
    p_FW_Entry_BL31: type: 17, flash_addr: 0x28800, length: 0xd114, emmc_partition:
    0
    p_FW_Entry_TEEOS: type: 18, flash_addr: 0x35a00, length: 0x1409a4, emmc_partitio
    n: 0
    p_FW_Entry_PCPU_FW_Certificate: type: 2, flash_addr: 0x20800, length: 0x400, emm
    c_partition: 0
    p_FW_Entry_PCPU_FW: type: 14, flash_addr: 0x21800, length: 0x7000, emmc_partitio
    n: 0
    get_bl31 = 0x00000000
    copy_img_from_emmc(00000000, 00000144, 0000d114, 80001000)
    AES_ECB_decrypt(80001000, 0000d000, 80001000, 10130260, 00000000, 00000080)
    AES key (0x10130260)
    0x10130260: 12 ef cd 22 68 24 57 13 d4 c3 b2 a1 be ba 90 90

    SHA256_hash(80001000, 0000d014, 1012f280, 00000000, 00000001)
    sha256 hash (0x1012f280)
    0x1012f280: 2e 55 29 1b 79 cf c2 df e6 fa c8 82 e6 bb f2 be
    0x1012f290: b9 21 ac 3a d2 42 d3 63 1c a4 a2 29 cf c8 74 be

    return hash2 = 0x1012f180
    hash1 from CP (0x1012f280)
    0x1012f280: 2e 55 29 1b 79 cf c2 df e6 fa c8 82 e6 bb f2 be
    0x1012f290: b9 21 ac 3a d2 42 d3 63 1c a4 a2 29 cf c8 74 be

    hash2 from sig (0x1012f180)
    0x1012f180: 2e 55 29 1b 79 cf c2 df e6 fa c8 82 e6 bb f2 be
    0x1012f190: b9 21 ac 3a d2 42 d3 63 1c a4 a2 29 cf c8 74 be


    compare_memory(1012f280, 1012f180, 00000020): 00000000
    process_bl31: 0x0
    get_dte_fw_certificate = 0x00000000
    copy_img_from_emmc(00000000, 00000106, 00000400, 1012e900)
    process_dte_fw_certificate: 0x0
    get_dte_bootcode_rtk = 0x00000000
    copy_img_from_emmc(00000000, 00000d00, 00180000, 00030000)
    процесс_dte_bootcode_rtk: 0x0
    перейти к BL31: 0x80001000



    Кргда нажимаешь при загрузке команды Ctr+q:


    д/г/р>
    д/г/р>
    д/г/р>
    д/г/р>
    д/г/р>
    д/г/р>
    д/г/р>
    д/г/р>
    д/г/р>
    д/г/р>
    д/г/р>
    д/г/р>
    д/г/р>
    д/г/р>
    д/г/р>
    д/г/р>
    д/г/р>
    д/г/р>
    д/г/р>
    д/г/р>
    д/г/р>
    д/г/р>
    д/г/р>
    д/г/р>
    д/г/р>
    д/г/р>

    После приближения "h" происходит следующее:

    д/г/р>ч
    скачать по адресу 0x80003000

    Yмодем:
    CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
    CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
    CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
    CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
    CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
    CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC

    а использование y-модема. Думаю, жить будет, осталось только файлы раздобыть:
    1) 0001-RTD161x_hwsetting_BOOT_2DDR4_8Gb_s2666-nas-
    RTD16xx_emmc.bin
    2) A01-Recovery-uda-RTD161x_hwsetting_BOOT_2DDR4_8Gb_s2666-nas-
    RTD16xx_emmc.bin
     
  20. Ralph Galli

    Ralph Galli New Member

    I have the Z9X and I am having problems trying to record with the HDMI IN. The reservation counts down then the recording starts then several minutes into the recording it stops the recording and the main page shows up.
     

Share This Page