Zidoo display settings

Discussion in 'HDD Media player(RTD 1619DR)' started by Drangonbaby, Oct 29, 2020.

Tags:
  1. Drangonbaby

    Drangonbaby New Member

    Realtek1619DR models compared to the previous generation of products, the display Settings menu is more complex, causing users to face complex Settings options and difficult, the following will explain the use of each function under the display Settings menu.

    1. resolution

    The resolution is selected automatically or at the highest supported resolution. If the screen is black, the display device is not supported. Please select from high to low until it is displayed normally.


    4K display device
    upload_2020-10-29_11-52-2.png

    1080P display device
    upload_2020-10-29_11-53-1.png

    Color setting
    4K 50·60Hz: Ycbcr420 10BIT is recommended;
    4K 23·30Hz: It is recommended to choose Ycbcr422 10bit;
    Non-4k (1080P device) : It is recommended to choose RGB444 10BIT /Ycbcr444 10bit;

    The above Suggestions can ensure that most devices are trouble-free, and users of color depth can also select tests from high to low.

    HDMI gamut: Recommended automatically
    Attached is a color space parameter comparison table of Zidoo player for reference only

    upload_2020-10-29_11-53-42.png

    Example 1: TV color setting parameters that support DOLby Vision LLDV
    upload_2020-10-29_11-53-52.png


    Example 2: Display device color setting parameters that support HDR
    upload_2020-10-29_11-54-25.png

    Color compatibility mode

    Since EDID does not declare the color depth supported in 4K, turning on this option will force the output of high color depth mode in 4K according to THE HDMI2.0A standard.
    The maximum output of 4K 50~60Hz YUV420 is 10bit
    The 4K YUN has a maximum output of 12 bits
    Turn this option off if you see a black screen empty at the above resolution
    upload_2020-10-29_11-54-42.png

    2. Screen Scale
    upload_2020-10-29_11-55-22.png



    Picture parameter

    As shown in the figure, if you want to try adjustment, please press the menu key of remote control - Advanced Setting - to call up the menu of image parameters for adjustment when playing the movie.
    upload_2020-10-29_11-55-39.png
    upload_2020-10-29_11-55-47.png




    HDR to SDR

    This option requires the HDR menu to open the CONVERSION of HDR into SDR, SDR Rec:.709 and SDR Rec:.2020 to be effective. There are three sets of Gamma optional, and Chiidu has made an independent image parameter adjustment option for the conversion of HDR into SDR.
    upload_2020-10-29_11-55-58.png
    upload_2020-10-29_11-56-7.png


    HDR

    Map HDR10: Turn this option on to force the TV to light HDR and play all movies to force the OUTPUT HDR10;
    The highest SDR Rec:.709: Turn on this option HDR damaging transfer SDR/BT709;

    Highest SDR Rec:.2020 (only display devices supporting BT2020 will display this option) : enable this option HDR lossless transfer of SDR/BT2020;

    Dolby Horizon LLDV (only TV with SUPPORT for LLDV will display this option) : turn on this option to light up the TV DV throughout, and play all movies to force DV output;

    Dolby Vision VS10 engine: according to the display equipment capacity output DV to HDR or HDR to SDR;

    Automatic: the machine automatically selects the output mode according to the output capability of the chip source and display device.

    Example 1: DV TV HDR setting interface, daily use recommended automatic selection.

    The following figure shows the opening of LLDV output DV mode.

    upload_2020-10-29_11-56-46.png


    Example 2: HDR setup interface for HDR display device is supported. Automatic selection is recommended.
    upload_2020-10-29_13-31-21.png



    Example 3:1080p displays the device HDR setup interface, and it is recommended to select the Dolby Vision VS10 engine.

    Note: Turning this option on will whiten the UI because the UI has no DV layer information, which is normal
    upload_2020-10-29_11-56-54.png






    7. MaxCLL and MaxFALL

    This option supports dynamic MaxFULL and MaxCll of HDR10+ output, as well as dynamic MaxFULL and MaxCll of DV
    upload_2020-10-29_11-57-19.png


    8.HDCP

    The full name of HDCP is High-Bandwidth Digital Content Protection. Chinese means high-definition digital content protection. It was developed by Intel to ensure that digitized video and sound data will not be illegally copied when sent through DVI or HDMI interfaces.

    Realtek 1619DR models all have DRM Widevine L1 certification and authorization, and some streaming media software needs to be turned on to watch HD videos.

    Note: This function needs to be connected to the display device and power amplifier support
    upload_2020-10-29_11-57-31.png



    9.Screen saver

    Automatically start the picture slideshow without operation, the later firmware will support custom pictures, so that the screen saver is no longer monotonous.
    upload_2020-10-29_11-57-48.png

    Wallpaper

    The system comes with three wallpapers for users to choose from, and the wallpapers can also be customized.
    upload_2020-10-29_11-57-57.png
     
    Bill-Z9X likes this.
  2. DaMacFunkin

    DaMacFunkin Active Member

    Hi, have you copied that and google translated that from Chinese?
    Some of the explanations don’t make much sense.
    Sledgehammer did a full review of all these settings and Mark Swift has a separate thread that explains the settings in practical terms.
     

Share This Page