I have the same problem. When trying to flash (press the reset button and turn on the power), the box starts with "boot" and immediately goes to "up--". Nothing appears on the tv. Without pressing the reset, the box powers into "boot" and stays like that for hours.
You have "ZIDOO_Z9S_N_v1.7.8_201809292102_usb-install.img" loaded and inserted on a suitable USB stick?
Some players don't like USB3 for bootloading (very simple piece of code). https://www.zidoo.tv/Support/support_guide/guide_target/7WjcmduqUFZKKmVViAFMcQ==.html Says also USB2 port.
Here you have z9s: https://www.zidoo.tv/Support/support_guide/guide_target/ua1h3YuLrJzeq7k9e[ld]3ulg==.html
Try to install the emergency method: https://www.zidoo.tv/Support/support_guide/guide_target/LpUhOsHcwiveq7k9e[ld]3ulg==.html You have to download the ZIDOO_Z9S_N_v1.7.8_201809292102_usb-install.img software and then unpack it using the 7-zip program for computer Then copy 4 files to a USB drive (rescue.emmc.dtb) ,(rescue.root.emmc.cpio.gz_pad.img ), (bluecore.audio), ( emmc.uImage) and place the file install.img also on the usb drive. 1.You must have all the files from the z9s software. 2.You have to have 5 files on a USB drive. 3.Connect usb. 4.Do not press the reset button. 5.Connect the power supply. 6.The installation process should start. 7.Do not move anything in 10 minu
Hi, I'm waiting for a new one. I don't know the firmware yet. Where can I find a list of firmware ( as happens for X9s)? Thanks