Video composite out problem

Discussion in 'ZIDOO X9' started by alverman, Nov 15, 2018.

  1. alverman

    alverman New Member

    Good evening, I recently bought this pvr, it seems to work well but as always there is something wrong with it and that thing you need !!

    The firmware installed is V2.1.1

    Then I use the composite output of zidoo x9s to connect it to a monitor via scart.
    Do not tell me that zidoo is wasted for a scart but I need it like this ;) !!
    So the problem that presents itself to me is that every time I turn it on, the image on the display is distorted and practically difficult to read, but if I enter the menu display and change the configuration and select and set any other resolution but not saved, x9 returns at the previous resolution the graphic is back OK !!
    I used a cable with jack and three rca (yellow, red and white) and the video comes out of the red and not the yellow rca.
    I do not think this is the problem, I also think that the cable had to be supplied together with the x9 !!

    I absolutely need that x9 start in the way it was configured !!

    Please help me.
    Thanks, Alberto
     

Share This Page