REW file how to upload

What is the easiest way to uplaod to my X9 a file created with the REW software ?

By the way, I am realy impressed by the X9 (from a RME owner)

 

File format like this?

Preamp:-4.00dB
Filter 1: ON LSHELF Fc 105 Hz Gain 4.2 dB Q 0.7
Filter 2: ON PEAK Fc 64.5 Hz Gain 0.4 dB Q 4.49
Filter 3: ON PEAK Fc 137.8 Hz Gain -1.4 dB Q 0.5
Filter 4: ON PEAK Fc 1000 Hz Gain 2.7 dB Q 2.09
Filter 5: ON PEAK Fc 2370.5 Hz Gain -2.7 dB Q 3.2
Filter 6: ON PEAK Fc 2989.8 Hz Gain 4.7 dB Q 2.35
Filter 7: ON PEAK Fc 3937.1 Hz Gain 2.1 dB Q 6
Filter 8: ON PEAK Fc 4634.3 Hz Gain -1.9 dB Q 6
Filter 9: ON PEAK Fc 5407 Hz Gain 2.7 dB Q 6.04
Filter 10: ON HSHELF Fc 10000 Hz Gain 2.1 dB Q 0.7

 

Here is a sample of an old file I used with my RME :

Equaliser: Generic
RMS Average 1
Filter 1: ON PK Fc 57.60 Hz Gain -6.60 dB Q 5.969
Filter 2: ON PK Fc 542.0 Hz Gain -3.20 dB Q 2.598
Filter 3: ON PK Fc 849.0 Hz Gain -1.80 dB Q 1.113
Filter 4: ON PK Fc 1793 Hz Gain -1.40 dB Q 3.750
Filter 5: ON PK Fc 5436 Hz Gain -4.40 dB Q 1.000

It looks similar to your exemple.

 

You must change PK to PEAK and add 5 more filters otherwise it does not match.

 

I will add the 5 missimg filters and adapt the PK to PEAK.

After that, how do I proceed to upload the file ?

 

In the program or web interface, go to HP-EQ, press BATCH EDIT, and paste the text file there.

 

Thanks for the information.

I should have thought of it... when it's too obvious, you miss it.

I'll just have to redo my measurements with REW on 10 bands!