Partage samba ne fonctionne pas

Discussion in 'ZIDOO X20 PRO' started by noterac, May 14, 2025.

  1. noterac

    noterac New Member

    Bonjour,

    J' ai mon zidoo z20 pro avec un disque interne que ne n' arrive pas a partagé et le voir sur mon réseau maison, que ce soit avec un identifiant et mot de passe obligatoire dans le partage samba ou en mode anonyme
    J' ai le dernier firmwate 1-95_G version google play

    Avez vous des idées

    Merci a vous
     
  2. Markswift2003

    Markswift2003 Well-Known Member SUPER Administrator Zidoo Beta Tester Contributor

    Per favore - Solo inglese, il mio amico francese.

    Molte grazie.
     
  3. noterac

    noterac New Member

    Hello,

    I have a Zidoo Z20 Pro with an internal hard drive that I can't manage to share or see on my home network, whether using Samba sharing with a required username and password or in anonymous mode.
    I'm using the latest firmware: 1.95_G Google Play version.

    Do you have any ideas?
     
  4. Markswift2003

    Markswift2003 Well-Known Member SUPER Administrator Zidoo Beta Tester Contributor

    presumably you have the Samba server switched on in network settings

    Can you access via the IP address? - for example typing “\\192.168.0.10” in file explorer in windows.

    (obviously using your own ip address!!)
     
  5. noterac

    noterac New Member

    Yes, I can access it from my computer if I enable password access; anonymous access doesn't work.
    Zidoo isn't detected on my LG TVs or Android TVs, whether anonymous or with a password.
     
  6. Zidoo Support-Kim

    Zidoo Support-Kim Well-Known Member SUPER Administrator Zidoo TECH Supporter

    Hey noterac, could you show me the error you encountered while accessing your computer?
     
  7. Markswift2003

    Markswift2003 Well-Known Member SUPER Administrator Zidoo Beta Tester Contributor

    If you can see it from your PC it means the Zidoo Samba server is correctly set up on the network and SMB shares are accessible. Not sure why you can't access it anonymously though - I'm using Windows 11 and have my Samba server set up as below and it works just fine:

    upload_2025-5-21_9-47-41.png

    (This screenshot is from a Z9X 8K but it works equally well on the older Realtek models)

    Are the TV's looking for a DNLA server instead of a Samba server perhaps?
     
    Zidoo Support-Kim likes this.

Share This Page