My T8 triggers the Z10 via the trigger out. The Z10 then triggers my Yamaha A-S3200 amplifier via the trigger out. When I switch on the T8, both devices switch on in sequence. However, when I switch off the T8, only the Z10 switches off, not the amplifier. The Z10 and the amplifier are connected via a mono trigger cable. What could be the reason for this?
That the Z10 does not release its trigger towards the AMP. I remember having read about this issue (or a similar, related one)... are you on the latest release on the Z10?
s**t IIRC it was related to the fact that the Z10 didn't fire the event when it was in its standby state... and that was supposedly fixed. Have you tried it within the active state of the Z10? I mean, prior to it going to sleep... it may halp determine if the issue is permanent, or happens in particular scenarios.
Thanks for answering. Yes, I tested that. The Z10 was active and displayed the fluctuating UV meter (in blue which is actually really nice. The eyes always listen too shortly before switching off. The trigger-out does not work with an I2C connection to the T8 or with a USB connection. So the issue is permanent. Unfortunately, I don't have another device to test the trigger input of the Yamaha device. However, I assume that it actually works as it should. An indication of its accurate functioning is that the Yammi also turns on when the Z10 boots up.
