New firmvare v2.3.1 version for ZIDOO UHD2000 release (ROM & OTA)

pavlin67 · Oct 26, 2019

New firmware v2.3.1 version for ZIDOO UHD2000 release
Model: Zidoo_UHD2000
Version: v2.3.1
Download: http://apidl.zidoo.tv/uhd2000/v2.3.1/ZIDOO_UHD2000_N_v2.3.1_201909231404_ota-package.zip
MD5 Hash: 2E36052C0134F7F97D8B225E08E1D3FC
Upgrade method：OTA

New ZDMC 18.4 http://apidl.zidoo.tv/app/zdmc-18.4_rtk-signed.apk
New Gapps 1.2.4 http://apidl.zidoo.tv/app/GappsInstaller-rtk-7.1_v1.2.4.apk
Zidoo Controller iOS https://apps.apple.com/us/app/zidoo-controller/id1477712512?l=zh&ls=1
Zidoo Controller Android https://play.google.com/store/apps/details?id=com.zidoo.control.phone
Root for OTA http://forum.zidoo.tv/index.php?att...4/&temp_hash=ba0107e6e141381df5aa25d1d85a2921

New firmware ROM v2.3.1 for Zidoo UHD2000
https://www.zidoo.tv/Support/support_guide/guide_target/EDuEFhCL20beq7k9e[ld]3ulg==.html

NOTE: Please remove all the external storage device（such as SD Card、SATA、USB）on box before you flash it. Just keep the one USB your need for falshing.
There is some risk for flashing your ZIDOO_UHD2000 BOX, please be quite careful to make it (It will clean out user data entirely, if you are not professional, please be cautious to do it).
The following Flashing Process is about ZIDOO_UHD2000, attaching ZIDOO_UHD2000 TV BOX:
First, do some preparation:

① A ZIDOO_UHD2000 TV BOX, one HDMI cable, A TV set (You kept surely, do not say any more);
② a quite fine needle, you can use other finer tools instead of it, such as toothpick, etc. ( In order to hold down the Reset button );
③U disk, ensuring that it is as below the format of FAT32

At the beginning, you need to download the ROM first ( http://apidl.zidoo.tv/uhd2000/v2.3.1/ZIDOO_UHD2000_N_v2.3.1_201909231404_usb-install.img ),then extract the file and rename to "install.img";
then copied to the Root Directory of the Udisk, then, insert U disk into one of USB3.0 port, as shown below red line mark.

Flash your box now:
First,press the RESTORE button then turn on the power by the same time,

while you have connect to TV, the TV will show the schedule,proved that you are flashing now，if you have connect to TV,

the TV will show the schedule,proved that you are flashing now (If not shown or have a green screen, is a normal phenomenon, don't power off either,just wait for 10 minute until the vfd shows "hello"

(this flash process about two minutes ), after finishing flashing will showed you install completed,

then it will enter the system automatically (It will be a little longer for the first time, about 2 minutes).