massive bugs in gui

i cannot get the micro-sd-card out of the device
did others check this?
i have to disassemble the bottom and the mainboard to get it out
the assembling is not exact enough

 

sorry for that.

 

if i put an usb stick on the device after a while there is a folder ANDROID on it with a lot of data in it?
in X6pro this never happened
what is the reason

even on the micro sd-card this folder is there with data in it

 

i cannot buy me anything for that "sorry"
i cannot disassemble the device everytime i would like to change the micro-sd-card
so i have to send it back and waiting weeks for another one?

 

Saw the same, I'll check it...

 

Any other report of this bad issue ?

 

every device what is putted on the x9 is spammed with data ...

 

i putted the x9 apart and rasp the pins where the screws come in from the mainboard about 1/2 mm away, now ir is roughly okai, maybe i have to do it again a little bit
or you have to rasp the slot where the micro sd card has to get it a little, but this is not so easy

 

when in adroid i "play" with the settings of the screen and hdmi, after a while the sreen is flickering.
and this even stays when i bring the settings back to the original ones
- it has been before i did the working inside the device -

because nothing helped i resetted the whole device and now the flickering is gone again
but i do not want to change the hdmi and scrren settings again
in x6 we had such things in the beginning as well

 

Do you have a shorter sd card or what? I had no problems geting it out. Just pressed it and the spring spits it out. Same as on X6

 

it depends not on sd card - i tried some - it is a problem of assembling or construction
see #5

 

could you change the HDMI cable?

 

i took the one from x6 and the one from x9
but after reset everything is okai, so what should be wrong with cable, when i change the settings and then the screen is flickering?!?

 

the sound with hdmi in is not sync with the video
i tested a sat receiver kathrein

 

Could you do the same test with your "old" X6 pro ?
I'll do this when I'll have a little spare time, hope soon...

 

not possible - x6 is on the way home

 

Our engineers are fixing the question.

thanks

 

and it seems that usb and sd-cards are somehow write protected for users
when i try to delete anything via total commander there is a message that i cannot do it

 

in x6 the blue light was very bright - in x9s it is okai
but the time is very bright now - could it be dimmed or even set of
i see no use in having this

 

No,it can't by now. But it is considerable.
Can you gather the issues temporarily before you just post it?
A summarizing article will be good. I see the board somehow be flooded .