Firmware Update for DMP|Play|T8: OTA v1.5.60

Hi. I'm announcing that it has already started. I just received a new update. Thx.
After update 1.5.60 I am reporting a fixed error when I wanted to turn on Internet Radio Beta from the defined button on the front panel at the bottom. After pressing it, nothing happened. Now it works 100% as well as before about 3 updates ago. Thanks for the fix Eversolo.

link to error:

 

Still no update yet here

 

I jsut tested with a t8. It works fine for me. Is there a way for you to delete it and reinstall it? Something might be corrupted.

 

I think that you’ve misread his post. We wrote that the error is fixed with the new update.

 

All firmware is now available for download on my site.

 

Ah. I thought he was saying it was still broken. My bad

 

I’ve received the update and so far everything seems to be fine. The volume gain for phono is nice but the max 6dB gain isn’t enough - MP3s are still significantly louder than my record player (I am on digital volume mode btw). 10dB might do the trick though.

 

Spotify DMP-A8-Lossless with connect works perfectly up to 24 bit.

 

Found out how to access meta data after looking at your explanations above. Thanks! It did not occur to me that it was below the fold on the poppup. Having meta data editing after a CD burn is going to save a lot of Time!

I still cannot find Navidome. Since the menu is somewhat different for the T8, I assumed it would be a listing under cloud, but I’m not seeing it. Unless it is the open subsonic entry. In which case it needs instructions on how to access the SSD on the T8.

Brad

 

After installing 1.5.60, I have enabled UPnP service and whilst the DMP-A6 is visble on the network (on Windows 11, Samsung A56 phone, Samsung TV etc)., no content is available (all music files are stored on 1Tb SSD internal on the A6. For example Windows Media Player reports - no files have been found for this remote library.
Can can anybody confirm this is working?

Mike

 

UPNP server not working here either. I can see the T8 in the server list. However, not a single device can properly connect.

On IOS (MConnect) I see no folder list appear.
On Android (BubbleUPNP) I get the folder list, but when I try to go one step down into Albums I get "Browse error: Current state of service prevents invoking that action. Failed to acquire lock in milliseconds: 500"
On Android (Hifi Cast) I get the same as BubbleUPNP
On Naim I don't see the T8 at all

(I waited until the library finished scanning to prevent simultaneous or conflicting access)

 

Hello everyone
8. Added UPNP server functionality to the music library.
It doesn't work on my A8

 

Still 16 bits on the T8 here.

 

I’m on a t8 and getting 24, but only if it’s a 24 file.

 

Of course, mate... you don't get 24 out of a 16 one...

 

I could not even find the menu to enable on my T8 (looked everywhere) ???

 

Main screen - Music Services - Music Library - Library - Cog wheel in the upper right corner - General - UPNP sever enable

 

I don't have "Music Services" on the home screen !
I have widgets turned off so I turned on but nothing there.
Not a T8 screen but my home screen is like this below. The music Icon takes you to the music Library (what I have selected) which shows the SSD ID and I use to re-scan when I add/delete a folder.
No Cog wheel there. I see the new U/I has the "Music Services" button. Looks like they forgot to add this UPnP stuff to the classic version.
I'll have to see how to switch to the newer U/I.

 

The "Simple U/I did not change things but I did find the gear icon under the "index" tab and turned ON UPnP.
Now I'm like the rest of you where the T8 shows up but no files...

 

I am having what looks to be the same problem.

When I turn on UPnP it locates my Plex configuration. Then I can choose to load the Music section of my Plex.

And when I give the command to look for my music files through Plex it finds nothing.