Beta version v6.3.12 for Z9X/Z10 Pro/Z1000 Pro/UHD3000 Discussion

Discussion in 'HDD Media player(RTD 1619DR)' started by Markswift2003, Jun 16, 2021.

  1. Markswift2003

    Markswift2003 Well-Known Member SUPER Administrator Beta test group Contributor

    Interesting - that post was in relation to ISO playback - I only use MKVs but I have a decent library of ISOs (and BDMV) for testing and I just tested a couple and although menus are still as hit and miss as they've always been, the movies played out at 4K23 as expected.

    You said your issue was with MKVs which is a whole different issue - I've honestly never seen framerate issues in MKVs and don't remember ever hearing of anyone else (happy to be corrected btw!).


    Rightly or wrongly, if it's available, the Z9X takes "Original Frame" as priority - as you say, the X9S certainly doesn't and I assume the same for the X8 (don't have one to test).
     
  2. vddan

    vddan Active Member

    Yes, If I have already spoken about it, I who am French it happens quite often that American series are reformatted by French channels in 25hz instead of 23.976 or 24p !!!
    And the zidoo reads the original frame 23 or 24p instead of 25hz, or jerks ........:confused::cool:
     
  3. giangi76

    giangi76 Active Member

    I also have ISOs... and from time to time the same happens also with them. It doesn't happen often (also with mkvs), but it can happen. Let me add some maybe extra helpful informations: I always use network playback (Samba) and always tried 4K HDR files (HDR10 and also some DV)


    I just tried your suggested trick, but nothing changed. And on the mediainfo report I always have "original frame rate" ( 23.976 (24000/1001) FPS) and "Frame rate" (24.000 FPS). Also in this case I did a network Samba playback and used a 4K HDR (HDR10) content.
     
  4. godalmighty

    godalmighty Active Member

    it happen to me but rarely
    again i think this firmware is really unstable
    IMG_20210715_220309.jpg IMG_20210715_220331.jpg IMG_20210715_221642.jpg IMG_20210715_222135.jpg
    after reboot everything back normal
    but sometimes it play normally from start
    i will try to factory reset and let see
     
  5. Markswift2003

    Markswift2003 Well-Known Member SUPER Administrator Beta test group Contributor

  6. godalmighty

    godalmighty Active Member

    no, just regular 720p 23.976 SDR
    Video
    ID : 1
    Format : AVC
    Format/Info : Advanced Video Codec
    Format profile : Baseline@L1.3
    Format settings : 2 Ref Frames
    Format settings, CABAC : No
    Format settings, Reference frames : 2 frames
    Codec ID : avc1
    Codec ID/Info : Advanced Video Coding
    Duration : 25 min 54 s
    Bit rate : 990 kb/s
    Width : 1 280 pixels
    Height : 720 pixels
    Display aspect ratio : 16:9
    Frame rate mode : Constant
    Frame rate : 23.976 (23976/1000) FPS
    Color space : YUV
    Chroma subsampling : 4:2:0
    Bit depth : 8 bits
    Scan type : Progressive
    Bits/(Pixel*Frame) : 0.045
    Stream size : 188 MiB (90%)
    Writing library : x264 core 119
    Encoding settings : cabac=0 / ref=2 / deblock=1:0:0 / analyse=0x1:0x111 / me=umh / subme=6 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=0 / 8x8dct=0 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=6 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=0 / weightp=0 / keyint=250 / keyint_min=23 / scenecut=40 / intra_refresh=0 / rc_lookahead=40 / rc=abr / mbtree=1 / bitrate=990 / ratetol=1.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / ip_ratio=1.40 / aq=1:1.00
    Language : English
    Codec configuration box : avcC


    and for marvel its

    //link removed//

    play in my HDR10 projector, work fine before
    but when i watch the anime and got this bug then i try the black widow and it the same :(

    but just like i said, its only happen sometimes
    i`ve already factory reset and let see if it happen again or not
     
    Last edited by a moderator: Jul 18, 2021
  7. Markswift2003

    Markswift2003 Well-Known Member SUPER Administrator Beta test group Contributor

    The reason I asked about 4K60 DV is because that always outputs at 600MHz which is the limit of HDMI 2 so I wondered if it was a bandwidth issue.

    Obviously not at 720p, but that's data corruption in the HDMI chain so if a factory reset has fixed it I'd guess the Zidoo SOC just went a bit bonkers and all is well now.

    As you say, let's see if it does it again.

    (Had to remove that link by the way - I don't really like editing people's posts but dodgy links can get us in trouble)
     
    Last edited: Jul 18, 2021
  8. godalmighty

    godalmighty Active Member

    sorry about that link, my bad :(

    the bug about the sub still exist after factory reset :(

    IMG_20210718_145315.jpg IMG_20210718_145322.jpg IMG_20210718_145344.jpg IMG_20210718_145331.jpg IMG_20210718_150455.jpg

    and one new bug, suddenly video information pop up by itself :(
    IMG_20210718_155344.jpg

    i see there a new firmware,6.3.20, i will flash it now :D
     
  9. Markswift2003

    Markswift2003 Well-Known Member SUPER Administrator Beta test group Contributor

    Other people have mentioned the info screen popping up but I've never seen that myself and that sub-title one is a really odd one, but there was SUP subtitle work on v6.3.20 so let's see how you get on with that..
     
  10. godalmighty

    godalmighty Active Member

    already flash 6.3.20, everything work fine so far
    the subtitle bug fix and the audio delay after pausing is fix too
     
    Markswift2003 likes this.
  11. rtos

    rtos Member

    Is there a reason why anyone prefers to FLASH the update instead of just performing the update using the Zidoo update screen?
     
  12. Markswift2003

    Markswift2003 Well-Known Member SUPER Administrator Beta test group Contributor

    It's the same process, but because it's in China, sometimes the update server can be slow for the rest of us (VPN to Hong Kong helps) so it's often useful to download the file and update through USB.
     
  13. godalmighty

    godalmighty Active Member

    no reason, i`m too using ota for 6.3.20
    but since sometimes i just want to back it up just in case

    wow theres 6.3.21 already???
     
  14. Visconti12

    Visconti12 Active Member

    No reason for me too, specially at the point that it's a beta version.
     
  15. Hello

    I have a samsung ue70tu7020 for my sleeping room and a zidoo z9x connected to the TV hdmi 1 and its no problem to passthrough dts x to my yamaha ysp-5600 over earc
     

Share This Page