QUOTE="OlivierQC, post: 132911, member: 6448"] And here is the result by forcing DVLL mode instead Auto mode P4_LG_Dolby_Trailer_4K_Demo = Dolby vision/DD P5_Dolby_Amaze = Dolby Vision/Atmos P7_FEL_GIJoe_The_Rise_of_Cobra = Dolby vision/DTS-HD P7_MEL_GIJoe_The_Rise_of_Cobra = Dolby vision P81_GlassBlowing2_3840x2160@59_94fps_15200kbps = Dolby vision/Atmos [/QUOTE] Hi, please may I ask you what is your setup for FEL Dolby Vision? I like MEL in Dolby Vision. Thank you very much for the advice.
Hi, you have missed the point, he is only getting HDR10 base layer converted to Low Latency Dolby Vision, he isn’t actually getting FEL Dolby Vision.
Hello, As DaMacFunkin says, it is with the VS10 Engine but according to markswift2003, the results are very good, and for me too but this is only my opinion. See you
Good morning, Here are purchasing website links for the purchase of a Zidoo device, this will make it easier for you to purchase a Zidoo product zidoo informs me that they will soon be available on the Amazon Store Website : https://www.zidoo.tv/ Zidoo Official Store : https://shop.zidoo.tv/ Zidoo German Store : https://www.zidoo.de/ Zidoo Aliexpress Store : https://www.aliexpress.com/store/al...tml?spm=a2g0o.detail.1000061.2.33b31234gUyM3i See you
Hello Zidoo Team, Another Homecinema.fr member who is happy with his Zidoo device, he had a Zapitti before he got the Z9X. See you
For new owners of a Zidoo and who need to update their device, here is a brief guide that should do the trick. Pour ceux qui ont besoin de mettre à jour leur appareil, voici un guide qui devrait vous aidez ------------- Download the FW and copy the compressed file to a USB key, plug it into one of the device's USB ports Téléchargez le FW, copiez le fichier compressé sur une clé USB et branchez-la sur un des ports USB de l'appareil. ------------- Go to '' ABOUT '' tile and click on '' UPDATE '' Aller dans ''about'' et cliquez sur ''update'' ------------- Click on '' USB update '' Selectionner ''USB update'' ------------- Open your USB key and double click on the FW compressed file. Choisissez votre clé USB et double clicquer sur le fichier correspondant au FW. ------------- The update procedure begins La procedure de la mise a jour du boitier démarre. ------------- Confirm the update by clicking on ''UPDATE'' Confirmez le lancement de la mise à jour en cliquant sur ''UPDATE'' ------------- Zidoo finalize the update and restart the device Zidoo va finaliser la mise à jour et redémarrera l'appareil a la fin. And voila, your box has the last update. See you
Brilliant, thank You. I have been looking for something like this - not usual that you place a .zip file on a USB stick is it, rather than an .img file? But I'm on it now for tomorrow now
Hello rozel, The zip or rar file is used for updating the device The .IMG is used to flash the box and this is my next tutorial. See you
Here is the procedure to make a flashing of your Zidoo Z9X, it is easy and fast. useful if you need to go back to a previous FW ---------------------- NOTE : About the .IMG file, choose the one for the Z9X and not for the Z9S or X9S, this has already happened to people. ---------------------- Download links below With Google framework version: https://mega.nz/file/Hc9hAZ6J#WryxHI0BgCbfPoZJWjZgIz2pFsbBAtbV0ARG6pTTsC0 Without Google framework version : https://mega.nz/file/XY1FlThL#mEQuIubWNxNKjW7Lt9RIUFvDBI6yTP-pcEh1wAG9l44 ---------------------- You need a USB key formatted in Fat32. Rename the .IMG file to "install" and copy it to the usb key which is formatted in FAT32 ---------------------- You have a USB key in FAT32 and the file renamed to 'install.img', as well as a paperclip, we can start. Turn OFF the device with the switch on the back, place the USB stick on one of the USB3 ports and insert a toothpick or paperclip into the reset hole by pressing lightly (you will feel a click), and turn ON the device. The Zidoo boot, HELLO appears on the VFD and Zidoo on the TV, you can remove the toothpick or the paper clip. HELLO will stay a few seconds on the VFD and Zidoo on the TV as well. The flashing procedure will begin, the box reboot once finished and you have a brand new box, of course it will be necessary re-configure your box. Here is a video See you
Hi, I have a question about updates. If there are new updates, why do I have to do this manually? I dont understand that. Why online update reports "up to date" if there is a new verison? thanks
For those who wish to access the hard drive connected to their Z9X from their PC and that your Win10 network settings are properly configured. Pour ceux qui souhaitent accéder au disque dur connecté à leur Z9X depuis leur PC et à condition que vos paramètres réseau dans Win10 soient corrects. Activate ''Samba Server'' in the Zidoo network options Dans les options réseaux du Zidoo, activez ''Samba Server'' Right click and choose ''Refresh'' in the Network page of win10. Dans la page réseau de WIN10 Faites un clic droit et actualiser The Zidoo device (ZD_SAMBA) will appear if your Zidoo device does not appear, check in Windows Features that the SMB 1 client is activated and ZD_SAMBA should appear Si votre appareil Zidoo n'apparaît pas, vérifiez dans les options de Win10 que le client SMB1 est activé....et ZD_SAMBA devrait apparaitre. Double-click on it, the internal memory (storage) of the Zidoo is available. Double-cliquez dessus, la memoire interne (storage) du Zidoo est disponible. Zidoo device (storage) See you
Hi, I am using v6.0.45G. I did some new tests with the new FW and the files work fine on the Z9X in summary, I have the same results as with 6.0.35G See you
Good question, You should create a thread for this, people on this forum with Panasonic TVs may have the same problem and you will get an answer to your question
This answers that and many other questions: http://forum.zidoo.tv/index.php?thr...w-about-the-new-rtd1619dr-based-models.80434/